RC522 RFID 13.56 MHz Reader Writer Module
Original price was: ₹250.00.₹70.00Current price is: ₹70.00.
Features:
- 13.56 MHz operating frequency (ISO/IEC 14443A)
- SPI, I²C, and UART communication support
- Works with 3.3 V (5 V tolerant)
- Read range up to 5 cm
- Compatible with MIFARE cards and tags
- Low power consumption
- Onboard PCB antenna
- Compact, lightweight design (~10–12 g)
In stock
RC522 – RFID Reader /Writer with Cards Kit includes a 13.56MHz RF reader and writer module that uses an RC522 IC and two S50 RFID cards tag. The MF RC522 is an integrated transmission module for contactless communication at 13.56 MHz. RC522 supports ISO 14443A/MIFARE mode. RC522 – RFID Reader features an outstanding modulation and demodulation algorithm to serve effortless RF communication at 13.56 MHz. The S50 RFID Cards will ease up the process helping you to learn and add the 13.56 MHz RF transition to your project.
The module uses SPI to communicate with microcontrollers. The open-hardware community already has a lot of projects exploiting the RC522 – RFID Communication, using Arduino.
Features:-
- The low-voltage, low-cost, small size of the non-contact card chip to read and write.
- 13.56MHz contactless communication card chip.
- MFRC522 supports the MIFARE series of high-speed non-contact communication, two-way data transmission rate up to 424kbit/s.
- ISO14443A frames and error detection.
- Suitable for Smart meters and portable handheld devices.
- Advanced modulation and demodulation concept completely integrated with all types of 13.56MHz passive contactless communication methods and protocols.
- 14443A compatible transponder signals.
- Supports rapid CRYPTO1 encryption algorithm, terminology validation MIFARE products.
- The reader and RF card terminal design meet advanced application development and production needs.
- Can be directly loaded into the various reader molds, very convenient.
Specifications:-
- Operating Frequency: 13.56MHz
- Reader Distance: ≥ 50mm / 1.95″ (mifare 1)
- Operating Current :13-26mA / DC 3.3V
- Idle Current :10-13mA / DC 3.3V
- Peak Current: < 30mA
- Sleep Current: < 80uA
- Data transfer rate: Maximum 10Mbit/s
- Supported card types: mifare1 S50, mifare1 S70 MIFARE Ultralight, mifare Pro, MIFARE DESFire
- Environmental Storage Temperature: -40 – 85 degrees Celsius
- Environmental Operating Temperature: -20 – 80 degrees Celsius
- Relative humidity: 5% – 95%
- Module interface: SPI
- Module Size: 4 × 6 cm
Package Content:-
- 1 x A RFID-RC522 Module
- 1 x RFID Blank Card
- 1 x Blue RFID Tag
- 1 x Straight Pin
- 1 x Curved Pin
Connection with Other Arduino Board:
| Signal | MFRC522 Reader/PCD Pin | Arduino Uno/101 Pin | Arduino Mega Pin | Arduino Nano v3 Pin | Arduino Leonardo/Micro Pin | Arduino Pro Micro Pin |
| RST/Reset | RST | 9 | 5 | D9 | RESET/ICSP-5 | RST |
| SPI SS | SDA(SS) | 10 | 53 | D10 | 10 | 10 |
| SPI MOSI | MOSI | 11 / ICSP-4 | 51 | D11 | ICSP-4 | 16 |
| SPI MISO | MISO | 12 / ICSP-1 | 50 | D12 | ICSP-1 | 14 |
| SPI SCK | SCK | 13 / ICSP-3 | 52 | D13 | ICSP-3 | 15 |
| Weight | 12 g |
|---|
Related products
-
LDR Module 4 Pin | Digital & Analog Light Sensor for Arduino
Original price was: ₹60.00.₹39.00Current price is: ₹39.00.Read moreFeatures: LDR Module LM393 4 Pin
✅ 4-Pin Output: Provides both digital (D0) and analog (A0) outputs for flexibility in projects.
✅ LM393 Comparator: Fast, reliable switching for accurate light detection.
✅ Adjustable Sensitivity: Onboard potentiometer lets you set the light threshold easily.
✅ Wide Voltage Range: Operates on 3.3V–5V, compatible with Arduino, ESP32, Raspberry Pi, and microcontrollers.
✅ High Stability: Stable performance with precise light sensing in varying conditions.
✅ Indicator LED: Shows digital output state for quick testing and debugging.
✅ Compact Design: Easy to integrate into DIY and IoT projects. -
W1209 Digital Temperature Controller Thermostat Module
Original price was: ₹120.00.₹80.00Current price is: ₹80.00.Add to cartW1209 Temperature Controller Module – Specifications
-
Type: Digital temperature controller / digital temp controller
-
Input Power: 12V DC
-
Measuring Input: NTC 10K 0.5% sensor
-
Waterproof Sensor: 0.5M probe
-
Output: 1-channel relay, 10A capacity
-
Temperature Range: -50°C to +110°C
-
Resolution: 0.1°C (-9.9 to 99.9°C), 1°C for other ranges
-
Measurement Accuracy: ±0.1°C
-
Control Accuracy: ±0.1°C
-
Refresh Rate: 0.5 seconds
-
-
Arduino GIGA R1 WiFi (ABX00063)
Original price was: ₹7,700.00.₹5,880.00Current price is: ₹5,880.00.Add to cartFeatures
-
Arduino GIGA R1 WiFi (ABX00063) powered by STM32H747XI dual-core (Cortex-M7 + Cortex-M4) microcontroller
-
Built-in Wi-Fi and Bluetooth 5.0 for IoT, robotics, and wireless connectivity
-
76 digital I/O pins & 12 analog inputs for flexible hardware interfacing
-
Expandable with MicroSD card slot, USB-C programming, and USB host support
-
Compatible with Arduino IDE & MicroPython, ideal for AI, edge computing, and computer vision application.
-
-
Breadboard GL-12 840 Tie Points
Original price was: ₹229.00.₹49.00Current price is: ₹49.00.Add to cartFeatures
- 840 Tie Points – Plenty of room for ICs, components, and jumper wires.
- Dual Power Rails – Efficient power distribution for multiple components.
- Durable Build – ABS plastic housing with nickel-plated phosphor bronze contacts.
- Reusable & Solderless – Quickly change or adjust circuits without damaging parts.
- Expandable Design – Interlocking edges allow connection with additional breadboards.
- Self-Adhesive Backing – Securely mount on any flat surface or project base.
