NRF24L01 2.4 MHz RF Transceiver Module
Original price was: ₹250.00.₹99.00Current price is: ₹99.00.
Specifications
- Low working voltage: 1.9 to 3.6 V
- I/O input voltage: 5V
- Wireless rate: 1 or 2 MBPS
- SPI interface rate: 0 to 8MBPS
- Transmission distance: 200 meters
- Dimensions: Width: 30 mm, Height: 10 mm, Depth: 20 mm
- Weight: 30 g
Only 2 left in stock
Features:
- Operates at 2.4GHz ISM band with GFSK modulation.
- Ultra-low power consumption, suitable for battery-powered projects.
- High data rate support: 250kbps, 1Mbps, and 2Mbps.
- Built-in CRC error detection and auto retransmission.
- SPI interface for easy integration with Arduino, ESP32, Raspberry Pi, and microcontrollers.
- Compact size with PCB antenna for stable wireless communication.
- Supports multi-point communication (up to 6 data pipes).
Applications:
- IoT (Internet of Things) devices and wireless sensor networks.
- Arduino and Raspberry Pi projects requiring wireless connectivity.
- Home automation systems and wireless switches.
- Robotics communication between multiple robots or robot & controller.
- Wireless data transmission in industrial and DIY projects.
- Remote controls for drones, RC cars, and appliances.
- Smart agriculture and telemetry systems.
Radio Frequency Modules are mostly used to add wireless capability to your project, you can use Wi-Fi modules or Bluetooth modules also but Radio Frequency modules will provide a longer range without the need of the internet and hence commonly used for RC control.
This 2400 MHz RF Transceiver Module is ultra-low power RF transceiver IC for the ISM (Industrial Scientific and Medical) band. The nRF Module has a transmission range of about 200m. It communicates with SPI communication protocols.
The nRF24L01 module is used in many applications like communication between two devices directly, home automation, wireless alarm systems, Robot control and monitoring systems, Remote sensing of temperatures and pressures or any sensor output, etc.
As the module employs SPI communication it can be used with both 3.3V and 5V microcontroller boards like Arduino, Raspberry Pi, AVR, NodeMCU, etc.
Connect MOSI MISO and SCK pins to respective SPI pins of your controller and connect CE and CSN pins to any GPIO pin.
| Weight | 30 g |
|---|
Related products
-
BLDC 30A ESC – Brushless DC Motor Electronic Speed Controller
Original price was: ₹550.00.₹350.00Current price is: ₹350.00.Add to cartBLDC 30A ESC – Key Specifications
-
Maximum Current: 30A for stable and BLDC Motor Controller
-
Peak Current: 40A (<10 sec) for high-performance bursts
-
BEC Output: 5V/2A to power receivers and electronics efficiently
-
Auto Cut-Off: 2.9V/cell for battery safety and protection
-
Compact Dimensions: 45 × 24 × 9 mm, lightweight 23 g design
-
Optimized for: Drones, RC cars, boats, and robotics applications
-
-
RC522 RFID 13.56 MHz Reader Writer Module
Original price was: ₹250.00.₹70.00Current price is: ₹70.00.Add to cartFeatures:
- 13.56 MHz operating frequency (ISO/IEC 14443A)
- SPI, I²C, and UART communication support
- Works with 3.3 V (5 V tolerant)
- Read range up to 5 cm
- Compatible with MIFARE cards and tags
- Low power consumption
- Onboard PCB antenna
- Compact, lightweight design (~10–12 g)
-
LDR Module 4 Pin | Digital & Analog Light Sensor for Arduino
Original price was: ₹60.00.₹39.00Current price is: ₹39.00.Read moreFeatures: LDR Module LM393 4 Pin
✅ 4-Pin Output: Provides both digital (D0) and analog (A0) outputs for flexibility in projects.
✅ LM393 Comparator: Fast, reliable switching for accurate light detection.
✅ Adjustable Sensitivity: Onboard potentiometer lets you set the light threshold easily.
✅ Wide Voltage Range: Operates on 3.3V–5V, compatible with Arduino, ESP32, Raspberry Pi, and microcontrollers.
✅ High Stability: Stable performance with precise light sensing in varying conditions.
✅ Indicator LED: Shows digital output state for quick testing and debugging.
✅ Compact Design: Easy to integrate into DIY and IoT projects. -
Digital Sensor TTP223B Module Capacitive Touch Switch
Original price was: ₹78.00.₹20.00Current price is: ₹20.00.Add to cart- Power supply voltage(VCC): 2.0, 3, 5.5 V.
- Output high VOH: 0.8 Vcc
- Output low VOL: 0.3 Vcc
- Response time (touch mode) : 60 mS
- Response time (low power mode) : 220 mS
- Can replace the traditional touch of a button
- Four M2 screws positioning holes for easy installation
