NRF24L01 2.4 MHz RF Transceiver Module
Original price was: ₹250.00.₹99.00Current price is: ₹99.00.
Specifications
- Low working voltage: 1.9 to 3.6 V
- I/O input voltage: 5V
- Wireless rate: 1 or 2 MBPS
- SPI interface rate: 0 to 8MBPS
- Transmission distance: 200 meters
- Dimensions: Width: 30 mm, Height: 10 mm, Depth: 20 mm
- Weight: 30 g
Only 2 left in stock
Features:
- Operates at 2.4GHz ISM band with GFSK modulation.
- Ultra-low power consumption, suitable for battery-powered projects.
- High data rate support: 250kbps, 1Mbps, and 2Mbps.
- Built-in CRC error detection and auto retransmission.
- SPI interface for easy integration with Arduino, ESP32, Raspberry Pi, and microcontrollers.
- Compact size with PCB antenna for stable wireless communication.
- Supports multi-point communication (up to 6 data pipes).
Applications:
- IoT (Internet of Things) devices and wireless sensor networks.
- Arduino and Raspberry Pi projects requiring wireless connectivity.
- Home automation systems and wireless switches.
- Robotics communication between multiple robots or robot & controller.
- Wireless data transmission in industrial and DIY projects.
- Remote controls for drones, RC cars, and appliances.
- Smart agriculture and telemetry systems.
Radio Frequency Modules are mostly used to add wireless capability to your project, you can use Wi-Fi modules or Bluetooth modules also but Radio Frequency modules will provide a longer range without the need of the internet and hence commonly used for RC control.
This 2400 MHz RF Transceiver Module is ultra-low power RF transceiver IC for the ISM (Industrial Scientific and Medical) band. The nRF Module has a transmission range of about 200m. It communicates with SPI communication protocols.
The nRF24L01 module is used in many applications like communication between two devices directly, home automation, wireless alarm systems, Robot control and monitoring systems, Remote sensing of temperatures and pressures or any sensor output, etc.
As the module employs SPI communication it can be used with both 3.3V and 5V microcontroller boards like Arduino, Raspberry Pi, AVR, NodeMCU, etc.
Connect MOSI MISO and SCK pins to respective SPI pins of your controller and connect CE and CSN pins to any GPIO pin.
| Weight | 30 g |
|---|
Related products
-
1 Channel 5V Relay Module
Original price was: ₹55.00.₹33.00Current price is: ₹33.00.Add to cartFeatures :
- 1 channel relay board
- Operating Voltage 5V
- Pull-down circuit for avoidance of malfunction
- Power supply indicator lamp
- Control indicator lamp
- Indicator for Relay output status
- Max Current : 20mA
- Relay Contact Current Capacity at AC250V: 10A
- Relay Contact Current Capacity at DC5V: 10A
- One normally closed contact and one normally open contact
- Triode drive, increasing relay coil
- High impedance controller pin
- Can Be controlled various appliances & other Equipment With Large current.
- Standard TTL Level logic controlled (AVR, Arduino, 8051, PIC, ARM)
- The module is compliant with international safety standards, control and load areas isolation trenches;
* Product Image is shown for illustrative purposes only and may differ from actual product.
-
LDR Module 4 Pin | Digital & Analog Light Sensor for Arduino
Original price was: ₹60.00.₹39.00Current price is: ₹39.00.Read moreFeatures: LDR Module LM393 4 Pin
✅ 4-Pin Output: Provides both digital (D0) and analog (A0) outputs for flexibility in projects.
✅ LM393 Comparator: Fast, reliable switching for accurate light detection.
✅ Adjustable Sensitivity: Onboard potentiometer lets you set the light threshold easily.
✅ Wide Voltage Range: Operates on 3.3V–5V, compatible with Arduino, ESP32, Raspberry Pi, and microcontrollers.
✅ High Stability: Stable performance with precise light sensing in varying conditions.
✅ Indicator LED: Shows digital output state for quick testing and debugging.
✅ Compact Design: Easy to integrate into DIY and IoT projects. -
Arduino Opta WiFi AFX00002 – Industrial IoT PLC | Arduino Pro
Original price was: ₹20,600.00.₹19,800.00Current price is: ₹19,800.00.Add to cartKey Features:
- Powerful MCU: STM32H747XI dual‑core Cortex‑M7 (480 MHz) + M4 (240 MHz)
- Versatile connectivity: 10/100 Ethernet, USB‑C, Wi‑Fi (802.11 b/g/n up to 65 Mbps), Bluetooth Low Energy, RS‑485 serial.
- I/O and switching: 8 configurable digital/analog inputs (0–10 V), and 4 relay outputs (10 A, 250 VAC).
- Secure and future‑proof: Onboard ATECC608B secure element, X.509 compliance, OTA firmware updates.
- Programming flexibility: Supports Arduino IDE sketches and IEC 61131‑3 languages (Ladder, FBD, ST, SFC, IL) via Arduino PLC IDE.
- Industrial-grade ruggedness: DIN-rail mount, IP20 rating, wide operating temperature (−20 °C to +50 °C), multiple certifications (CE, ENEC, UL)
-
OLED Display 0.96 Inch I2C 4-Pin Blue Screen – SSD1306 Module
Original price was: ₹325.00.₹199.00Current price is: ₹199.00.Add to cartSpecifications of 0.96″ SSD1306 OLED Display:
- Operating Voltage Range: 3.3V to 6V
- Communication: I2C
- Resolution: 128 x 64
- Colour: Monochrome (Blue)
- Driver IC: SSD1306
- Supports both 5V and 3.3V Logic
- Module Dimension: ~ 27 x 27 x 4.1 mm
