BMP180 Digital Barometric Pressure Sensor Module
Original price was: ₹180.00.₹36.00Current price is: ₹36.00.
Features
- Measures barometric pressure, altitude & temperature
- High precision: ±1 hPa (pressure), ±0.5°C (temperature)
- Pressure range: 300–1100 hPa
- Operating voltage: 1.8V–3.6V (3.3V typical)
- I²C interface for easy integration
- Low power consumption (<1 μA in standby)
- Compact & lightweight (~2 g)
- Compatible with Arduino, Raspberry Pi & other microcontrollers
In stock
BMP180 Digital Barometric Pressure Sensor Module is used for measuring barometric pressure and altitude. It also has a temperature sensor for temperature compensation of pressure measurements. It uses push sensors for the BMP180. It offers a pressure measuring range of 300 to 1100 hPa with a relative pressure error of 0.12 hPa.
BMP 180 is a barometric pressure sensor with an I2C interface. Barometric pressure sensors measure the absolute pressure of the air around them. This pressure varies with both the weather and altitude. Depending on how you interpret the data, you can monitor changes in the weather, measure altitude, or any other tasks that require an accurate pressure reading.
Note: (1 hPa ≡ 100 Pa) which is equal to 0.001 bar (atmospheric)
Features :
- I2C interface.
- Max I2C Speed: 3.4Mhz
- Pressure conversion time: 5msec
- Fully calibrated.
- Small and easy to use.
- Voltage supply: 1.8 ~ 3.6 V
- Current supply: 5µA at 1Hz
- Peak current: 1000µA
- Very low noise: up to 0.02hPa (17cm)
- Pressure Range: 300hPa to 1100hPa (+9000m to -500m)
Package Includes :
- 1 x BMP180 Digital Barometric Pressure Sensor Module
- 1 x 4Burg Connector(Straight)
| Input Voltage | 1.8 ~ 3.6 V |
| Interface Type | I2C |
| Max I2C Speed | 3.4Mhz |
| PCB Size ( L x W ) | 1.3 x 1.2 cm |
| Peak Current | 1000µA |
| Pressure conversion time | 5 ms |
| Pressure Range | 300hPa to 1100hPa |
| Weight | 5 g |
|---|
Related products
-
Arduino Portenta Breakout Board ASX00031
Original price was: ₹5,170.00.₹4,100.00Current price is: ₹4,100.00.Read moreKey Features
-
Full signal access: Connect to every high-density pin of Portenta boards for versatile testing.
-
Rapid prototyping: Speeds up development cycles for industrial-grade solutions.
-
Seamless integration: Works with Arduino Portenta H7 and other boards in the Arduino ecosystem.
-
Educational use: Ideal for training students and technicians in embedded systems and industrial-grade control.
-
Lab-friendly design: Compact, reliable, and ready for high-density connections.
-
Expandable with other Arduino boards: Integrates with Arduino Nano Original for compact projects.
-
-
NODEMCU – ESP8266 Wifi Development Board
Original price was: ₹200.00.₹150.00Current price is: ₹150.00.Read moreNodeMCU is a IoT Module based on ESP8266 wifi Module. NodeMCU uses Lua Scripting language and is an open source Internet of Things (IoT) platform. This modules has CH340g USB to TTL IC.
Features of Node-MCU IoT Module:
- Open source IoT Platform
- Easily Programmable
- Low cost & Simple to Implement
- WI-FI enabled
Specification of Node-MCU IoT Module:
- It is based on ESP8266, integrates GPIO, PWM, IIC, 1-Wire and ADC all in one board.
- Power your development in the fastest way combining with NodeMCU Firmware!
- USB-TTL included, plug&play
- 10 GPIO, every GPIO can be PWM, I2C, 1-wire
-
Arduino Nicla Sense ME ABX00050 – Tiny IoT Sensor Hub
Original price was: ₹5,530.00.₹5,100.00Current price is: ₹5,100.00.Read moreKey Features
✅ Bosch BHI260AP: Smart 6-axis IMU with embedded AI for motion detection & gesture recognition.
✅ Bosch BMM150: 3-axis magnetometer for accurate heading and orientation.
✅ Bosch BMP390: High-resolution pressure sensor for accurate altitude detection.
✅ Bosch BME688: Environmental sensor for gas, humidity, temperature, and barometric pressure.
✅ Powerful MCU: nRF52832 (ARM Cortex-M4 @ 64 MHz, BLE 5.0) with 512 KB Flash, 64 KB RAM.
✅ Edge AI Ready: Run TinyML models for real-time analysis on-device.
✅ Tiny footprint: 22.86 x 22.86 mm (0.9 x 0.9 inches).
✅ Compatible: Works standalone or with Portenta/Arduino MKR boards.
✅ Ultra-low power consumption: Suitable for battery-powered IoT edge nodes. -
LCD1602 Parallel LCD Display with Blue Backlight
Original price was: ₹150.00.₹99.00Current price is: ₹99.00.Add to cartFeatures:
- 16×2 character LCD module
- Parallel interface for easy connection
- Blue backlight with white characters
- Low power consumption
- Compatible with Arduino, Raspberry Pi, PIC, AVR, and STM32
- Adjustable contrast
