LCD1602 Parallel LCD Display with Blue Backlight
Original price was: ₹150.00.₹99.00Current price is: ₹99.00.
You save (%)
Features:
- 16×2 character LCD module
- Parallel interface for easy connection
- Blue backlight with white characters
- Low power consumption
- Compatible with Arduino, Raspberry Pi, PIC, AVR, and STM32
- Adjustable contrast
Only 2 left in stock
LCD1602 Parallel LCD Display with Blue Backlight – 16×2 Character Module
Applications:
- DIY electronics projects
- Arduino and Raspberry Pi displays
- Measuring instruments
- Embedded systems
- Industrial controllers
- Hobby and educational projects
Package Includes :
1 x LCD1602 Parallel LCD Display with Blue Backlight
| Weight | 40 g |
|---|
Related products
OLED Display 0.96 Inch I2C 4-Pin Blue Screen – SSD1306 Module
Original price was: ₹325.00.₹199.00Current price is: ₹199.00.
You save (%)Read moreSpecifications of 0.96″ SSD1306 OLED Display:
- Operating Voltage Range: 3.3V to 6V
- Communication: I2C
- Resolution: 128 x 64
- Colour: Monochrome (Blue)
- Driver IC: SSD1306
- Supports both 5V and 3.3V Logic
- Module Dimension: ~ 27 x 27 x 4.1 mm
PIR Motion Detector Sensor Module
Original price was: ₹75.00.₹54.00Current price is: ₹54.00.
You save (%)Add to cartFeatures:
- Detection Distance: 3 to 7m (can be adjusted)
- Delay Time: 5 to 200s (Can be Adjusted, Default 5s +/- 3%)
- Blockade time: 2.5s (Default)
- Work temperature: -20 ~ +80°C
- Dimension: 3.2cm x 2.4cm x 1.8cm (Approx)
- Color: White + Green OR White + Blue
- Infrared Sensor with Control Circuit Board
- The Sensitivity and Holding Time Can be Adjusted
- Working Voltage Range: DC 4.5V- 20V
- Current Drain: <60uA
- Detection Range: <140°
- Voltage Output: High/Low level Signal: 3.3V TTL output
- Sensitive Setting: Turn to Right, Distance Increases (About 7M); Turn to Left, Distance Reduce (About 3M)
- Time Setting: Turn to Right, Time Increases (About 200S); Turn to Left, Time Reduce (About 5S).
* Product Image is shown for illustrative purposes only and may differ from actual product.
Arduino Nicla Sense ME ABX00050 – Tiny IoT Sensor Hub
Original price was: ₹5,530.00.₹5,100.00Current price is: ₹5,100.00.
You save (%)Read moreKey Features
✅ Bosch BHI260AP: Smart 6-axis IMU with embedded AI for motion detection & gesture recognition.
✅ Bosch BMM150: 3-axis magnetometer for accurate heading and orientation.
✅ Bosch BMP390: High-resolution pressure sensor for accurate altitude detection.
✅ Bosch BME688: Environmental sensor for gas, humidity, temperature, and barometric pressure.
✅ Powerful MCU: nRF52832 (ARM Cortex-M4 @ 64 MHz, BLE 5.0) with 512 KB Flash, 64 KB RAM.
✅ Edge AI Ready: Run TinyML models for real-time analysis on-device.
✅ Tiny footprint: 22.86 x 22.86 mm (0.9 x 0.9 inches).
✅ Compatible: Works standalone or with Portenta/Arduino MKR boards.
✅ Ultra-low power consumption: Suitable for battery-powered IoT edge nodes.BLDC 30A ESC – Brushless DC Motor Electronic Speed Controller
Original price was: ₹550.00.₹350.00Current price is: ₹350.00.
You save (%)Read moreBLDC 30A ESC – Key Specifications
Maximum Current: 30A for stable and BLDC Motor Controller
Peak Current: 40A (<10 sec) for high-performance bursts
BEC Output: 5V/2A to power receivers and electronics efficiently
Auto Cut-Off: 2.9V/cell for battery safety and protection
Compact Dimensions: 45 × 24 × 9 mm, lightweight 23 g design
Optimized for: Drones, RC cars, boats, and robotics applications
