2 Channel 5V Relay Module with Optocoupler
Original price was: ₹80.00.₹62.00Current price is: ₹62.00.
Specification:
- High current relay, AC250V 10A, DC5V 10A
- 2 LEDs to indicate when relays are on
- Works with logic level signals from 3.3V or 5V devices
- Opto isolation circuitry
* Product Images are shown for illustrative purposes only and may differ from actual product.
In stock
This is a 5V, 10A 2-Channel Relay interface board. It can be used to control various appliances, and other equipments with large current.
It can be controlled directly with 3.3V or 5V logic signals from a microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic).
It has a 1×4 (2.54mm pitch) pin header for connecting power (5V and 0V), and for controlling the 2 relays.
The pins are marked on the PCB:-
- GND – Connect 0V to this pin.
- IN1 – Controls relay 1, active Low Relay will turn on when this input goes below about 2.0V
- IN2 – Controls relay 2, active Low Relay will turn on when this input goes below about 2.0V
- VCC – Connect 5V to this pin. Is used to power the opto couplers
Related products
-
BLDC 30A ESC – Brushless DC Motor Electronic Speed Controller
Original price was: ₹550.00.₹350.00Current price is: ₹350.00.Add to cartBLDC 30A ESC – Key Specifications
-
Maximum Current: 30A for stable and BLDC Motor Controller
-
Peak Current: 40A (<10 sec) for high-performance bursts
-
BEC Output: 5V/2A to power receivers and electronics efficiently
-
Auto Cut-Off: 2.9V/cell for battery safety and protection
-
Compact Dimensions: 45 × 24 × 9 mm, lightweight 23 g design
-
Optimized for: Drones, RC cars, boats, and robotics applications
-
-
Arduino Opta WiFi AFX00002 – Industrial IoT PLC | Arduino Pro
Original price was: ₹20,600.00.₹19,800.00Current price is: ₹19,800.00.Add to cartKey Features:
- Powerful MCU: STM32H747XI dual‑core Cortex‑M7 (480 MHz) + M4 (240 MHz)
- Versatile connectivity: 10/100 Ethernet, USB‑C, Wi‑Fi (802.11 b/g/n up to 65 Mbps), Bluetooth Low Energy, RS‑485 serial.
- I/O and switching: 8 configurable digital/analog inputs (0–10 V), and 4 relay outputs (10 A, 250 VAC).
- Secure and future‑proof: Onboard ATECC608B secure element, X.509 compliance, OTA firmware updates.
- Programming flexibility: Supports Arduino IDE sketches and IEC 61131‑3 languages (Ladder, FBD, ST, SFC, IL) via Arduino PLC IDE.
- Industrial-grade ruggedness: DIN-rail mount, IP20 rating, wide operating temperature (−20 °C to +50 °C), multiple certifications (CE, ENEC, UL)
-
W1209 Digital Temperature Controller Thermostat Module
Original price was: ₹120.00.₹80.00Current price is: ₹80.00.Add to cartW1209 Temperature Controller Module – Specifications
-
Type: Digital temperature controller / digital temp controller
-
Input Power: 12V DC
-
Measuring Input: NTC 10K 0.5% sensor
-
Waterproof Sensor: 0.5M probe
-
Output: 1-channel relay, 10A capacity
-
Temperature Range: -50°C to +110°C
-
Resolution: 0.1°C (-9.9 to 99.9°C), 1°C for other ranges
-
Measurement Accuracy: ±0.1°C
-
Control Accuracy: ±0.1°C
-
Refresh Rate: 0.5 seconds
-
-
PIR Motion Detector Sensor Module
Original price was: ₹75.00.₹54.00Current price is: ₹54.00.Add to cartFeatures:
- Detection Distance: 3 to 7m (can be adjusted)
- Delay Time: 5 to 200s (Can be Adjusted, Default 5s +/- 3%)
- Blockade time: 2.5s (Default)
- Work temperature: -20 ~ +80°C
- Dimension: 3.2cm x 2.4cm x 1.8cm (Approx)
- Color: White + Green OR White + Blue
- Infrared Sensor with Control Circuit Board
- The Sensitivity and Holding Time Can be Adjusted
- Working Voltage Range: DC 4.5V- 20V
- Current Drain: <60uA
- Detection Range: <140°
- Voltage Output: High/Low level Signal: 3.3V TTL output
- Sensitive Setting: Turn to Right, Distance Increases (About 7M); Turn to Left, Distance Reduce (About 3M)
- Time Setting: Turn to Right, Time Increases (About 200S); Turn to Left, Time Reduce (About 5S).
* Product Image is shown for illustrative purposes only and may differ from actual product.
Reviews
There are no reviews yet.