Category

Sale!
2 Channel Relay Module with Optocoupler
2 Channel 5V Relay Module with Optocoupler

2 Channel 5V Relay Module with Optocoupler

Original price was: ₹80.00.Current price is: ₹62.00.

Specification:

  • High current relay, AC250V 10A, DC5V 10A
  • 2 LEDs to indicate when relays are on
  • Works with logic level signals from 3.3V or 5V devices
  • Opto isolation circuitry

 

* Product Images are shown for illustrative purposes only and may differ from actual product.

In stock

This is a 5V, 10A 2-Channel Relay interface board. It can be used to control various appliances, and other equipments with large current.

It can be controlled directly with 3.3V or 5V logic signals from a microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic).

It has a 1×4 (2.54mm pitch) pin header for connecting power (5V and 0V), and for controlling the 2 relays.

The pins are marked on the PCB:-

  • GND – Connect 0V to this pin.
  • IN1 – Controls relay 1, active Low Relay will turn on when this input goes below about 2.0V
  • IN2 – Controls relay 2, active Low Relay will turn on when this input goes below about 2.0V
  • VCC – Connect 5V to this pin. Is used to power the opto couplers

Reviews

There are no reviews yet.

Be the first to review “2 Channel 5V Relay Module with Optocoupler”

Your email address will not be published. Required fields are marked *

SKU: 000033 Category: Tags: , , ,

Related products

  • Sale! ESP8266 - NodeMCU Wifi Module

    NODEMCU – ESP8266 Wifi Development Board

     Original price was: ₹200.00.Current price is: ₹150.00.

    NodeMCU is a IoT Module based on ESP8266 wifi Module. NodeMCU uses Lua Scripting language and is an open source Internet of Things (IoT) platform. This modules has CH340g USB to TTL IC.

    Features of Node-MCU IoT Module:

    • Open source IoT Platform
    • Easily Programmable
    • Low cost & Simple to Implement
    • WI-FI enabled

    Specification of Node-MCU IoT Module:

    • It is based on ESP8266, integrates GPIO, PWM, IIC, 1-Wire and ADC all in one board.
    • Power your development in the fastest way combining with NodeMCU Firmware!
    • USB-TTL included, plug&play
    • 10 GPIO, every GPIO can be PWM, I2C, 1-wire
    Read more
  • Sale! Digital Sensor TTP223B Module Capacitive Touch Switch

    Digital Sensor TTP223B Module Capacitive Touch Switch

     Original price was: ₹78.00.Current price is: ₹20.00.
    1. Power supply voltage(VCC): 2.0, 3, 5.5 V.
    2. Output high VOH: 0.8 Vcc
    3. Output low VOL: 0.3 Vcc
    4. Response time (touch mode) : 60 mS
    5. Response time (low power mode) : 220 mS
    6. Can replace the traditional touch of a button
    7. Four M2 screws positioning holes for easy installation
    Add to cart
  • Sale! NRF24L01 2.4F RF Transceiver Module

    NRF24L01 2.4 MHz RF Transceiver Module

     Original price was: ₹250.00.Current price is: ₹99.00.

    Specifications

    • Low working voltage: 1.9 to 3.6 V
    • I/O input voltage: 5V
    • Wireless rate: 1 or 2 MBPS
    • SPI interface rate: 0 to 8MBPS
    • Transmission distance: 200 meters
    • Dimensions: Width: 30 mm, Height: 10 mm, Depth: 20 mm
    • Weight: 30 g
    Add to cart
  • Sale! W1209 Temperature Controller

    W1209 Digital Temperature Controller Thermostat Module

     Original price was: ₹120.00.Current price is: ₹80.00.

    W1209 Temperature Controller Module – Specifications

    • Type: Digital temperature controller / digital temp controller

    • Input Power: 12V DC

    • Measuring Input: NTC 10K 0.5% sensor

    • Waterproof Sensor: 0.5M probe

    • Output: 1-channel relay, 10A capacity

    • Temperature Range: -50°C to +110°C

    • Resolution: 0.1°C (-9.9 to 99.9°C), 1°C for other ranges

    • Measurement Accuracy: ±0.1°C

    • Control Accuracy: ±0.1°C

    • Refresh Rate: 0.5 seconds

    Add to cart