NRF24L01 2.4 MHz RF Transceiver Module
Original price was: ₹250.00.₹99.00Current price is: ₹99.00.
You save (%)
Specifications
- Low working voltage: 1.9 to 3.6 V
- I/O input voltage: 5V
- Wireless rate: 1 or 2 MBPS
- SPI interface rate: 0 to 8MBPS
- Transmission distance: 200 meters
- Dimensions: Width: 30 mm, Height: 10 mm, Depth: 20 mm
- Weight: 30 g
In stock
Features:
- Operates at 2.4GHz ISM band with GFSK modulation.
- Ultra-low power consumption, suitable for battery-powered projects.
- High data rate support: 250kbps, 1Mbps, and 2Mbps.
- Built-in CRC error detection and auto retransmission.
- SPI interface for easy integration with Arduino, ESP32, Raspberry Pi, and microcontrollers.
- Compact size with PCB antenna for stable wireless communication.
- Supports multi-point communication (up to 6 data pipes).
Applications:
- IoT (Internet of Things) devices and wireless sensor networks.
- Arduino and Raspberry Pi projects requiring wireless connectivity.
- Home automation systems and wireless switches.
- Robotics communication between multiple robots or robot & controller.
- Wireless data transmission in industrial and DIY projects.
- Remote controls for drones, RC cars, and appliances.
- Smart agriculture and telemetry systems.
Radio Frequency Modules are mostly used to add wireless capability to your project, you can use Wi-Fi modules or Bluetooth modules also but Radio Frequency modules will provide a longer range without the need of the internet and hence commonly used for RC control.
This 2400 MHz RF Transceiver Module is ultra-low power RF transceiver IC for the ISM (Industrial Scientific and Medical) band. The nRF Module has a transmission range of about 200m. It communicates with SPI communication protocols.
The nRF24L01 module is used in many applications like communication between two devices directly, home automation, wireless alarm systems, Robot control and monitoring systems, Remote sensing of temperatures and pressures or any sensor output, etc.
As the module employs SPI communication it can be used with both 3.3V and 5V microcontroller boards like Arduino, Raspberry Pi, AVR, NodeMCU, etc.
Connect MOSI MISO and SCK pins to respective SPI pins of your controller and connect CE and CSN pins to any GPIO pin.
| Weight | 30 g |
|---|
Related products
1 Channel 5V Relay Module
Original price was: ₹55.00.₹33.00Current price is: ₹33.00.
You save (%)Add to cartFeatures :
- 1 channel relay board
- Operating Voltage 5V
- Pull-down circuit for avoidance of malfunction
- Power supply indicator lamp
- Control indicator lamp
- Indicator for Relay output status
- Max Current : 20mA
- Relay Contact Current Capacity at AC250V: 10A
- Relay Contact Current Capacity at DC5V: 10A
- One normally closed contact and one normally open contact
- Triode drive, increasing relay coil
- High impedance controller pin
- Can Be controlled various appliances & other Equipment With Large current.
- Standard TTL Level logic controlled (AVR, Arduino, 8051, PIC, ARM)
- The module is compliant with international safety standards, control and load areas isolation trenches;
* Product Image is shown for illustrative purposes only and may differ from actual product.
2 Channel 5V Relay Module with Optocoupler
Original price was: ₹80.00.₹62.00Current price is: ₹62.00.
You save (%)Add to cart⚡ 2 Channel 5V Relay Module with Optocoupler – Key Specifications
High-Current Relay Performance: Each relay can safely handle AC 250V up to 10A and DC 5V up to 10A, making it suitable for both household and industrial automation.
LED Status Indicators: Two built-in LEDs clearly show when each relay is activated, providing instant visual feedback for testing and operation.
Logic-Level Compatibility: Designed to work with 3.3V or 5V logic signals, making it fully compatible with Arduino, ESP32, Raspberry Pi, and other microcontrollers.
Opto-Isolation Protection: Equipped with optocoupler circuitry, this module protects your microcontroller from high-voltage spikes and electrical noise, ensuring safe, reliable, and stable switching.
User-Friendly Installation: Compact PCB with labeled terminals and indicator LEDs for quick setup and safe wiring.
Note: Product images are for illustrative purposes only and may differ slightly from the actual module.BMP180 Digital Barometric Pressure Sensor Module
Original price was: ₹180.00.₹36.00Current price is: ₹36.00.
You save (%)Add to cartFeatures
- Measures barometric pressure, altitude & temperature
- High precision: ±1 hPa (pressure), ±0.5°C (temperature)
- Pressure range: 300–1100 hPa
- Operating voltage: 1.8V–3.6V (3.3V typical)
- I²C interface for easy integration
- Low power consumption (<1 μA in standby)
- Compact & lightweight (~2 g)
- Compatible with Arduino, Raspberry Pi & other microcontrollers
Arduino Portenta Breakout Board ASX00031
Original price was: ₹5,170.00.₹4,100.00Current price is: ₹4,100.00.
You save (%)Read moreKey Features
Full signal access: Connect to every high-density pin of Portenta boards for versatile testing.
Rapid prototyping: Speeds up development cycles for industrial-grade solutions.
Seamless integration: Works with Arduino Portenta H7 and other boards in the Arduino ecosystem.
Educational use: Ideal for training students and technicians in embedded systems and industrial-grade control.
Lab-friendly design: Compact, reliable, and ready for high-density connections.
Expandable with other Arduino boards: Integrates with Arduino Nano Original for compact projects.
