BMP180 Digital Barometric Pressure Sensor Module
Original price was: ₹180.00.₹36.00Current price is: ₹36.00.
You save (%)
Features
- Measures barometric pressure, altitude & temperature
- High precision: ±1 hPa (pressure), ±0.5°C (temperature)
- Pressure range: 300–1100 hPa
- Operating voltage: 1.8V–3.6V (3.3V typical)
- I²C interface for easy integration
- Low power consumption (<1 μA in standby)
- Compact & lightweight (~2 g)
- Compatible with Arduino, Raspberry Pi & other microcontrollers
In stock
BMP180 Digital Barometric Pressure Sensor Module is used for measuring barometric pressure and altitude. It also has a temperature sensor for temperature compensation of pressure measurements. It uses push sensors for the BMP180. It offers a pressure measuring range of 300 to 1100 hPa with a relative pressure error of 0.12 hPa.
BMP 180 is a barometric pressure sensor with an I2C interface. Barometric pressure sensors measure the absolute pressure of the air around them. This pressure varies with both the weather and altitude. Depending on how you interpret the data, you can monitor changes in the weather, measure altitude, or any other tasks that require an accurate pressure reading.
Note: (1 hPa ≡ 100 Pa) which is equal to 0.001 bar (atmospheric)
Features :
- I2C interface.
- Max I2C Speed: 3.4Mhz
- Pressure conversion time: 5msec
- Fully calibrated.
- Small and easy to use.
- Voltage supply: 1.8 ~ 3.6 V
- Current supply: 5µA at 1Hz
- Peak current: 1000µA
- Very low noise: up to 0.02hPa (17cm)
- Pressure Range: 300hPa to 1100hPa (+9000m to -500m)
Package Includes :
- 1 x BMP180 Digital Barometric Pressure Sensor Module
- 1 x 4Burg Connector(Straight)
| Input Voltage | 1.8 ~ 3.6 V |
| Interface Type | I2C |
| Max I2C Speed | 3.4Mhz |
| PCB Size ( L x W ) | 1.3 x 1.2 cm |
| Peak Current | 1000µA |
| Pressure conversion time | 5 ms |
| Pressure Range | 300hPa to 1100hPa |
| Weight | 5 g |
|---|
Related products
W1209 Digital Temperature Controller Thermostat Module
Original price was: ₹2,000.00.₹1,500.00Current price is: ₹1,500.00.
You save (%)Add to cartW1209 Temperature Controller Module – Specifications
Type: Digital temperature controller / digital temp controller
Input Power: 12V DC
Measuring Input: NTC 10K 0.5% sensor
Waterproof Sensor: 0.5M probe
Output: 1-channel relay, 10A capacity
Temperature Range: -50°C to +110°C
Resolution: 0.1°C (-9.9 to 99.9°C), 1°C for other ranges
Measurement Accuracy: ±0.1°C
Control Accuracy: ±0.1°C
Refresh Rate: 0.5 seconds
BLDC 30A ESC – Brushless DC Motor Electronic Speed Controller
Original price was: ₹550.00.₹350.00Current price is: ₹350.00.
You save (%)Read moreBLDC 30A ESC – Key Specifications
Maximum Current: 30A for stable and BLDC Motor Controller
Peak Current: 40A (<10 sec) for high-performance bursts
BEC Output: 5V/2A to power receivers and electronics efficiently
Auto Cut-Off: 2.9V/cell for battery safety and protection
Compact Dimensions: 45 × 24 × 9 mm, lightweight 23 g design
Optimized for: Drones, RC cars, boats, and robotics applications
OLED Display 0.96 Inch I2C 4-Pin Blue Screen – SSD1306 Module
Original price was: ₹325.00.₹199.00Current price is: ₹199.00.
You save (%)Read moreSpecifications of 0.96″ SSD1306 OLED Display:
- Operating Voltage Range: 3.3V to 6V
- Communication: I2C
- Resolution: 128 x 64
- Colour: Monochrome (Blue)
- Driver IC: SSD1306
- Supports both 5V and 3.3V Logic
- Module Dimension: ~ 27 x 27 x 4.1 mm
Arduino Opta WiFi AFX00002 – Industrial IoT PLC | Arduino Pro
Original price was: ₹20,600.00.₹19,800.00Current price is: ₹19,800.00.
You save (%)Add to cartKey Features:
- Powerful MCU: STM32H747XI dual‑core Cortex‑M7 (480 MHz) + M4 (240 MHz)
- Versatile connectivity: 10/100 Ethernet, USB‑C, Wi‑Fi (802.11 b/g/n up to 65 Mbps), Bluetooth Low Energy, RS‑485 serial.
- I/O and switching: 8 configurable digital/analog inputs (0–10 V), and 4 relay outputs (10 A, 250 VAC).
- Secure and future‑proof: Onboard ATECC608B secure element, X.509 compliance, OTA firmware updates.
- Programming flexibility: Supports Arduino IDE sketches and IEC 61131‑3 languages (Ladder, FBD, ST, SFC, IL) via Arduino PLC IDE.
- Industrial-grade ruggedness: DIN-rail mount, IP20 rating, wide operating temperature (−20 °C to +50 °C), multiple certifications (CE, ENEC, UL)
