SIM800L GPRS GSM Module TTL Serial Port with Antenna
Original price was: ₹350.00.₹193.00Current price is: ₹193.00.
Features :
- TTL serial port for serial port, you can link directly to the micro-controller.
- Don’t need MAX232.
- Power module automatically boots, homing network.
- Onboard signal lights all the way.
- It flashes slowly when there is a signal, it flashes quickly when there is no signal.
Only 1 left in stock
This is Small SIM800L GPRS GSM Module Micro SIM Card Core Board Quad-band TTL Serial Port with the antenna, in this module two antennas have been included.
SIM800L GSM/GPRS module is a miniature GSM modem, which can be integrated into a great number of IoT projects. You can use this module to accomplish almost anything a normal cell phone can; SMS text messages, make or receive phone calls, connecting to the internet through GPRS, TCP/IP, and more! To top it off, the module supports quad-band GSM/GPRS network, meaning it works pretty much anywhere in the world
First Antenna is made of wire (which solders directly to NET pin on PCB) – very useful in narrow places.
Second Antenna – PCB antenna – with double-sided tape and attached pigtail cable with IPX connector. This one has better performance and allows to put your module inside a metal case – as long the antenna is outside.
Caution: Use a resistor divider circuit before interfacing it with Arduino to avoid the damage to the module.
| Weight | 10 g |
|---|
Related products
-
RC522 RFID 13.56 MHz Reader Writer Module
Original price was: ₹250.00.₹70.00Current price is: ₹70.00.Add to cartFeatures:
- 13.56 MHz operating frequency (ISO/IEC 14443A)
- SPI, I²C, and UART communication support
- Works with 3.3 V (5 V tolerant)
- Read range up to 5 cm
- Compatible with MIFARE cards and tags
- Low power consumption
- Onboard PCB antenna
- Compact, lightweight design (~10–12 g)
-
Arduino Nano R4 (ABX00142) Without Header
Original price was: ₹2,500.00.₹1,450.00Current price is: ₹1,450.00.Read moreFeatures
- Renesas RA4M1 32-bit ARM Cortex-M4 (48 MHz) microcontroller
- 256 kB flash memory, 32 kB SRAM
- Wi-Fi connectivity (ESP32-S3 co-processor)
- 12-bit DAC for analog audio and signal generation
- Compatible with Nano form factor for seamless upgrades
- No pre-soldered headers for custom low-profile designs
- USB-C connectivity for modern, reliable connections
- Supports Arduino IDE and MicroPython
-
NODEMCU – ESP8266 Wifi Development Board
Original price was: ₹200.00.₹150.00Current price is: ₹150.00.Read moreNodeMCU is a IoT Module based on ESP8266 wifi Module. NodeMCU uses Lua Scripting language and is an open source Internet of Things (IoT) platform. This modules has CH340g USB to TTL IC.
Features of Node-MCU IoT Module:
- Open source IoT Platform
- Easily Programmable
- Low cost & Simple to Implement
- WI-FI enabled
Specification of Node-MCU IoT Module:
- It is based on ESP8266, integrates GPIO, PWM, IIC, 1-Wire and ADC all in one board.
- Power your development in the fastest way combining with NodeMCU Firmware!
- USB-TTL included, plug&play
- 10 GPIO, every GPIO can be PWM, I2C, 1-wire
-
Arduino Nano 33 IoT ABX00027
Original price was: ₹2,500.00.₹1,599.00Current price is: ₹1,599.00.Add to cartKey Features of Arduino Nano 33 IoT ABX00027
-
Compact and low-power design – perfect for portable or battery-powered projects
-
SAMD21 32-bit ARM® Cortex®-M0+ MCU – high-efficiency processing
-
WiFi + BLE connectivity via u-blox NINA-W102 – seamless IoT integration
-
Microchip® ECC608A secure element – robust data protection
-
6-axis IMU sensor – motion, vibration, and gesture detection
-
Arduino IoT Cloud ready – monitor, control, and automate remotely
-
Beginner-friendly Arduino IDE support – fast prototyping and deployment
-
