SIM800L GPRS GSM Module TTL Serial Port with Antenna
Original price was: ₹350.00.₹193.00Current price is: ₹193.00.
Features :
- TTL serial port for serial port, you can link directly to the micro-controller.
- Don’t need MAX232.
- Power module automatically boots, homing network.
- Onboard signal lights all the way.
- It flashes slowly when there is a signal, it flashes quickly when there is no signal.
Only 1 left in stock
This is Small SIM800L GPRS GSM Module Micro SIM Card Core Board Quad-band TTL Serial Port with the antenna, in this module two antennas have been included.
SIM800L GSM/GPRS module is a miniature GSM modem, which can be integrated into a great number of IoT projects. You can use this module to accomplish almost anything a normal cell phone can; SMS text messages, make or receive phone calls, connecting to the internet through GPRS, TCP/IP, and more! To top it off, the module supports quad-band GSM/GPRS network, meaning it works pretty much anywhere in the world
First Antenna is made of wire (which solders directly to NET pin on PCB) – very useful in narrow places.
Second Antenna – PCB antenna – with double-sided tape and attached pigtail cable with IPX connector. This one has better performance and allows to put your module inside a metal case – as long the antenna is outside.
Caution: Use a resistor divider circuit before interfacing it with Arduino to avoid the damage to the module.
| Weight | 10 g |
|---|
Related products
-
SIM900A GPRS GSM Module for Arduino and Raspberry Pi
Original price was: ₹550.00.₹350.00Current price is: ₹350.00.Add to cartFeatures
- Dual-band GSM/GPRS 900/1800 MHz
- Supports voice calls, SMS, GPRS data & fax
- Standard AT command set via UART
- Supply voltage: 3.4V–4.4V (4V typical)
- Baud rate up to 115200 bps
- SIM card slot for mini-SIM
- Low power consumption in idle mode
- Compatible with Arduino, Raspberry Pi & other MCU boards
- Onboard status LEDs for network & power
-
Arduino GIGA R1 WiFi (ABX00063)
Original price was: ₹7,700.00.₹5,880.00Current price is: ₹5,880.00.Add to cartFeatures
- STM32H747XI dual-core (Cortex-M7 + Cortex-M4) microcontroller
- Built-in Wi-Fi and Bluetooth connectivity
- 76 digital I/O pins and 12 analog inputs for expanded interfacing
- MicroSD card slot and USB host support
- Compatible with Arduino and MicroPython environments
- Supports advanced AI and edge computing workloads
- USB-C power and programming interface
- Onboard camera interface for computer vision applications
-
Arduino Nano 33 IoT ABX00027
Original price was: ₹2,500.00.₹1,599.00Current price is: ₹1,599.00.Add to cartFeatures:
- Wi-Fi & Bluetooth (u-blox NINA-W102 module)
- ARM Cortex-M0+ 32-bit MCU (SAMD21, 48 MHz)
- Hardware crypto chip (ATECC608A) for secure IoT
- 6-axis IMU (LSM6DS3 accelerometer + gyroscope)
- Compact Nano form factor (45 × 18 mm)
- 14 digital I/O, 8 analog inputs, 1 DAC output
- Native USB for programming & communication
- Operates at 3.3 V logic level
-
JDY-33 Dual Mode Bluetooth Module | HC-05/06 Compatible
Original price was: ₹225.00.₹120.00Current price is: ₹120.00.Add to cartModel JDY-33 Bluetooth Version Bluetooth 3.0 SPP + BLE4.2 Communication Interface UART Operating Temperature Range -40°C to 80°C Operating Voltage 1.8 – 3.6V Receiving Sensitivity -96dbm Transmission distance 30M Transmit Power 6db Working Current 6.5mA Working Frequency 2.4GHZ Length 31 mm Height 3 mm Width 16 mm
