Dual Axis XY Joystick Module
Original price was: ₹99.00.₹49.00Current price is: ₹49.00.
Joystick Module Features and Specifications:
- Compatible with Arduino or with most of the microcontrollers
- Two independent Potentiometers – one for each axis ( X and Y)
- Auto return to center position
- Low weight
- Cup-type Knob
- Operating Voltage: 5V
- Internal Potentiometer value: 10k
- 2.54mm pin interface leads
- Dimensions: 1.57 in x 1.02 in x 1.26 in (4.0 cm x 2.6 cm x 3.2 cm)
- Operating temperature: 0 to 70 °C
In stock
This is a Dual Axis Joystick Module to measure position coordinates on the X and Y axis by moving the “hat”. Directional movements are controlled by simply two potentiometers of 10k ohm – one for each axis. This joystick also has a select button that is actuated when the joystick is press down.
Features:
- Dual-axis (X & Y) analog joystick for directional control.
- Push button switch included for extra functionality.
- Compatible with Arduino, ESP32, Raspberry Pi, and microcontrollers.
- Standard 2.54mm pins for easy breadboard and jumper wire use.
- Spring return mechanism for smooth centering.
- Compact and durable design for DIY and robotics projects.
Applications:
- Robotics control (robot car, robotic arm, drone gimbals).
- DIY game controllers and simulation setups.
- Arduino and Raspberry Pi projects for motion input.
- RC vehicle remote controls.
- Automation systems requiring manual analog input.
- Mechatronics learning projects.
| Weight | 10 g |
|---|
Related products
-
Arduino Nicla Sense ME ABX00050 – Tiny IoT Sensor Hub
Original price was: ₹5,530.00.₹5,100.00Current price is: ₹5,100.00.Read moreKey Features
✅ Bosch BHI260AP: Smart 6-axis IMU with embedded AI for motion detection & gesture recognition.
✅ Bosch BMM150: 3-axis magnetometer for accurate heading and orientation.
✅ Bosch BMP390: High-resolution pressure sensor for accurate altitude detection.
✅ Bosch BME688: Environmental sensor for gas, humidity, temperature, and barometric pressure.
✅ Powerful MCU: nRF52832 (ARM Cortex-M4 @ 64 MHz, BLE 5.0) with 512 KB Flash, 64 KB RAM.
✅ Edge AI Ready: Run TinyML models for real-time analysis on-device.
✅ Tiny footprint: 22.86 x 22.86 mm (0.9 x 0.9 inches).
✅ Compatible: Works standalone or with Portenta/Arduino MKR boards.
✅ Ultra-low power consumption: Suitable for battery-powered IoT edge nodes. -
Digital Sensor TTP223B Module Capacitive Touch Switch
Original price was: ₹78.00.₹20.00Current price is: ₹20.00.Add to cart- Power supply voltage(VCC): 2.0, 3, 5.5 V.
- Output high VOH: 0.8 Vcc
- Output low VOL: 0.3 Vcc
- Response time (touch mode) : 60 mS
- Response time (low power mode) : 220 mS
- Can replace the traditional touch of a button
- Four M2 screws positioning holes for easy installation
-
BLDC 30A ESC – Brushless DC Motor Electronic Speed Controller
Original price was: ₹550.00.₹350.00Current price is: ₹350.00.Add to cartBLDC 30A ESC – Key Specifications
-
Maximum Current: 30A for stable and BLDC Motor Controller
-
Peak Current: 40A (<10 sec) for high-performance bursts
-
BEC Output: 5V/2A to power receivers and electronics efficiently
-
Auto Cut-Off: 2.9V/cell for battery safety and protection
-
Compact Dimensions: 45 × 24 × 9 mm, lightweight 23 g design
-
Optimized for: Drones, RC cars, boats, and robotics applications
-
-
5V Buzzer Module
Original price was: ₹50.00.₹30.00Current price is: ₹30.00.Add to cartFeatures:
- Operates on 5V DC, compatible with Arduino and microcontrollers
- Loud and clear sound output for alerts and indicators
- Compact size for easy integration into DIY projects
- Simple 3-pin connection (VCC, GND, Signal)
- Low current consumption, energy-efficient
- Can be used with PWM for sound control
- Onboard driver circuit for easy triggering
- Ideal for alarms, timers, and notification systems
