Digital Sensor TTP223B Module Capacitive Touch Switch
Original price was: ₹78.00.₹20.00Current price is: ₹20.00.
- Power supply voltage(VCC): 2.0, 3, 5.5 V.
- Output high VOH: 0.8 Vcc
- Output low VOL: 0.3 Vcc
- Response time (touch mode) : 60 mS
- Response time (low power mode) : 220 mS
- Can replace the traditional touch of a button
- Four M2 screws positioning holes for easy installation
In stock
TTP223B Capacitive Touch Key Sensor Module is based on a touch-sensing IC capacitive touch switch module. It allows you to remove the worry of conventional push-type keys.
Digital Capacitive Touch Switch Module is based on TTP223B. Normally, it outputs low and keeps at a low power state. When a touch is sensed on the circular marked region, it outputs high and switches to the quick response state. When not being touched for 12 seconds, it switches to a low power state again.
In addition to the thin paper ( non-metallic ) covering the surface of the module, as long as the correct location of the touch, you can make it hidden in the walls, desktops, and other parts of buttons.
Touch Sensor Interface :
- Touch area: Similar to a fingerprint icon inside the area, you can touch the trigger finger.
- Control Interface: A total of three pins (GND, VCC, SIG), GND to the ground, VCC is the power supply, SIG digital signal output pin
- Positioning holes: 4 M2 screws positioning hole diameter is 2.2mm, the positioning of the module is easy to install, to achieve the inter-module combination.
- Power Indicator: Green LED, power on the right that is shiny
Package Includes :
1 x TTP223B Capacitive Touch Key Sensor Module
| Weight | 85 g |
|---|
Related products
-
Arduino Nicla Vision – ABX00051
Original price was: ₹8,980.00.₹7,999.00Current price is: ₹7,999.00.Add to cartFeatures
- Processor: STM32H747AII6 Dual Arm® Cortex® M7/M4 IC
- Camera: 2MP with integrated image processor
- AI-ready: Supports TensorFlow Lite for on-device inference
- Connectivity: Bluetooth® Low Energy, Wi-Fi (via external module)
- Memory: 1MB SRAM, 2MB Flash, 16MB external SPI Flash
- Sensors: IMU, microphone, distance sensor
- Low-power operation: ideal for battery-powered edge AI applications
- Compact size: 22.86 x 22.86 mm
- USB Type-C for programming and power
-
2 Channel 5V Relay Module with Optocoupler
Original price was: ₹80.00.₹62.00Current price is: ₹62.00.Add to cart⚡ 2 Channel 5V Relay Module with Optocoupler – Key Specifications
-
High-Current Relay Performance: Each relay can safely handle AC 250V up to 10A and DC 5V up to 10A, making it suitable for both household and industrial automation.
-
LED Status Indicators: Two built-in LEDs clearly show when each relay is activated, providing instant visual feedback for testing and operation.
-
Logic-Level Compatibility: Designed to work with 3.3V or 5V logic signals, making it fully compatible with Arduino, ESP32, Raspberry Pi, and other microcontrollers.
-
Opto-Isolation Protection: Equipped with optocoupler circuitry, this module protects your microcontroller from high-voltage spikes and electrical noise, ensuring safe, reliable, and stable switching.
-
User-Friendly Installation: Compact PCB with labeled terminals and indicator LEDs for quick setup and safe wiring.
Note: Product images are for illustrative purposes only and may differ slightly from the actual module. -
-
Arduino Nicla Sense ME ABX00050 – Tiny IoT Sensor Hub
Original price was: ₹5,530.00.₹5,100.00Current price is: ₹5,100.00.Read moreKey Features
✅ Bosch BHI260AP: Smart 6-axis IMU with embedded AI for motion detection & gesture recognition.
✅ Bosch BMM150: 3-axis magnetometer for accurate heading and orientation.
✅ Bosch BMP390: High-resolution pressure sensor for accurate altitude detection.
✅ Bosch BME688: Environmental sensor for gas, humidity, temperature, and barometric pressure.
✅ Powerful MCU: nRF52832 (ARM Cortex-M4 @ 64 MHz, BLE 5.0) with 512 KB Flash, 64 KB RAM.
✅ Edge AI Ready: Run TinyML models for real-time analysis on-device.
✅ Tiny footprint: 22.86 x 22.86 mm (0.9 x 0.9 inches).
✅ Compatible: Works standalone or with Portenta/Arduino MKR boards.
✅ Ultra-low power consumption: Suitable for battery-powered IoT edge nodes. -
LDR Module 4 Pin | Digital & Analog Light Sensor for Arduino
Original price was: ₹60.00.₹39.00Current price is: ₹39.00.Read moreFeatures: LDR Module LM393 4 Pin
✅ 4-Pin Output: Provides both digital (D0) and analog (A0) outputs for flexibility in projects.
✅ LM393 Comparator: Fast, reliable switching for accurate light detection.
✅ Adjustable Sensitivity: Onboard potentiometer lets you set the light threshold easily.
✅ Wide Voltage Range: Operates on 3.3V–5V, compatible with Arduino, ESP32, Raspberry Pi, and microcontrollers.
✅ High Stability: Stable performance with precise light sensing in varying conditions.
✅ Indicator LED: Shows digital output state for quick testing and debugging.
✅ Compact Design: Easy to integrate into DIY and IoT projects.
