BMP180 Digital Barometric Pressure Sensor Module
Original price was: ₹180.00.₹36.00Current price is: ₹36.00.
Features
- Measures barometric pressure, altitude & temperature
- High precision: ±1 hPa (pressure), ±0.5°C (temperature)
- Pressure range: 300–1100 hPa
- Operating voltage: 1.8V–3.6V (3.3V typical)
- I²C interface for easy integration
- Low power consumption (<1 μA in standby)
- Compact & lightweight (~2 g)
- Compatible with Arduino, Raspberry Pi & other microcontrollers
In stock
BMP180 Digital Barometric Pressure Sensor Module is used for measuring barometric pressure and altitude. It also has a temperature sensor for temperature compensation of pressure measurements. It uses push sensors for the BMP180. It offers a pressure measuring range of 300 to 1100 hPa with a relative pressure error of 0.12 hPa.
BMP 180 is a barometric pressure sensor with an I2C interface. Barometric pressure sensors measure the absolute pressure of the air around them. This pressure varies with both the weather and altitude. Depending on how you interpret the data, you can monitor changes in the weather, measure altitude, or any other tasks that require an accurate pressure reading.
Note: (1 hPa ≡ 100 Pa) which is equal to 0.001 bar (atmospheric)
Features :
- I2C interface.
- Max I2C Speed: 3.4Mhz
- Pressure conversion time: 5msec
- Fully calibrated.
- Small and easy to use.
- Voltage supply: 1.8 ~ 3.6 V
- Current supply: 5µA at 1Hz
- Peak current: 1000µA
- Very low noise: up to 0.02hPa (17cm)
- Pressure Range: 300hPa to 1100hPa (+9000m to -500m)
Package Includes :
- 1 x BMP180 Digital Barometric Pressure Sensor Module
- 1 x 4Burg Connector(Straight)
| Input Voltage | 1.8 ~ 3.6 V |
| Interface Type | I2C |
| Max I2C Speed | 3.4Mhz |
| PCB Size ( L x W ) | 1.3 x 1.2 cm |
| Peak Current | 1000µA |
| Pressure conversion time | 5 ms |
| Pressure Range | 300hPa to 1100hPa |
| Weight | 5 g |
|---|
Related products
-
LDR Module 4 Pin | Digital & Analog Light Sensor for Arduino
Original price was: ₹60.00.₹39.00Current price is: ₹39.00.Read moreFeatures: LDR Module LM393 4 Pin
✅ 4-Pin Output: Provides both digital (D0) and analog (A0) outputs for flexibility in projects.
✅ LM393 Comparator: Fast, reliable switching for accurate light detection.
✅ Adjustable Sensitivity: Onboard potentiometer lets you set the light threshold easily.
✅ Wide Voltage Range: Operates on 3.3V–5V, compatible with Arduino, ESP32, Raspberry Pi, and microcontrollers.
✅ High Stability: Stable performance with precise light sensing in varying conditions.
✅ Indicator LED: Shows digital output state for quick testing and debugging.
✅ Compact Design: Easy to integrate into DIY and IoT projects. -
Dual Axis XY Joystick Module
Original price was: ₹99.00.₹49.00Current price is: ₹49.00.Add to cartJoystick Module Features and Specifications:
- Compatible with Arduino or with most of the microcontrollers
- Two independent Potentiometers – one for each axis ( X and Y)
- Auto return to center position
- Low weight
- Cup-type Knob
- Operating Voltage: 5V
- Internal Potentiometer value: 10k
- 2.54mm pin interface leads
- Dimensions: 1.57 in x 1.02 in x 1.26 in (4.0 cm x 2.6 cm x 3.2 cm)
- Operating temperature: 0 to 70 °C
-
Arduino Uno Rev3 Original A000066
Original price was: ₹2,500.00.₹1,560.00Current price is: ₹1,560.00.Add to cartTech specs
Microcontroller ATmega328P Operating Voltage 5V Input Voltage (recommended) 7-12V Input Voltage (limit) 6-20V Digital I/O Pins 14 (of which 6 provide PWM output) PWM Digital I/O Pins 6 Analog Input Pins 6 DC Current per I/O Pin 20 mA DC Current for 3.3V Pin 50 mA Flash Memory 32 KB (ATmega328P) of which 0.5 KB used by bootloader SRAM 2 KB (ATmega328P) EEPROM 1 KB (ATmega328P) Clock Speed 16 MHz LED_BUILTIN 13 Length 68.6 mm Width 53.4 mm Weight 25 g -
1 Channel 5V Relay Module
Original price was: ₹55.00.₹33.00Current price is: ₹33.00.Add to cartFeatures :
- 1 channel relay board
- Operating Voltage 5V
- Pull-down circuit for avoidance of malfunction
- Power supply indicator lamp
- Control indicator lamp
- Indicator for Relay output status
- Max Current : 20mA
- Relay Contact Current Capacity at AC250V: 10A
- Relay Contact Current Capacity at DC5V: 10A
- One normally closed contact and one normally open contact
- Triode drive, increasing relay coil
- High impedance controller pin
- Can Be controlled various appliances & other Equipment With Large current.
- Standard TTL Level logic controlled (AVR, Arduino, 8051, PIC, ARM)
- The module is compliant with international safety standards, control and load areas isolation trenches;
* Product Image is shown for illustrative purposes only and may differ from actual product.
