BMP180 Digital Barometric Pressure Sensor Module
Original price was: ₹180.00.₹36.00Current price is: ₹36.00.
Features
- Measures barometric pressure, altitude & temperature
- High precision: ±1 hPa (pressure), ±0.5°C (temperature)
- Pressure range: 300–1100 hPa
- Operating voltage: 1.8V–3.6V (3.3V typical)
- I²C interface for easy integration
- Low power consumption (<1 μA in standby)
- Compact & lightweight (~2 g)
- Compatible with Arduino, Raspberry Pi & other microcontrollers
In stock
BMP180 Digital Barometric Pressure Sensor Module is used for measuring barometric pressure and altitude. It also has a temperature sensor for temperature compensation of pressure measurements. It uses push sensors for the BMP180. It offers a pressure measuring range of 300 to 1100 hPa with a relative pressure error of 0.12 hPa.
BMP 180 is a barometric pressure sensor with an I2C interface. Barometric pressure sensors measure the absolute pressure of the air around them. This pressure varies with both the weather and altitude. Depending on how you interpret the data, you can monitor changes in the weather, measure altitude, or any other tasks that require an accurate pressure reading.
Note: (1 hPa ≡ 100 Pa) which is equal to 0.001 bar (atmospheric)
Features :
- I2C interface.
- Max I2C Speed: 3.4Mhz
- Pressure conversion time: 5msec
- Fully calibrated.
- Small and easy to use.
- Voltage supply: 1.8 ~ 3.6 V
- Current supply: 5µA at 1Hz
- Peak current: 1000µA
- Very low noise: up to 0.02hPa (17cm)
- Pressure Range: 300hPa to 1100hPa (+9000m to -500m)
Package Includes :
- 1 x BMP180 Digital Barometric Pressure Sensor Module
- 1 x 4Burg Connector(Straight)
| Input Voltage | 1.8 ~ 3.6 V |
| Interface Type | I2C |
| Max I2C Speed | 3.4Mhz |
| PCB Size ( L x W ) | 1.3 x 1.2 cm |
| Peak Current | 1000µA |
| Pressure conversion time | 5 ms |
| Pressure Range | 300hPa to 1100hPa |
| Weight | 5 g |
|---|
Related products
-
Arduino Uno Rev3 Original A000066
Original price was: ₹2,500.00.₹1,560.00Current price is: ₹1,560.00.Add to cartTech specs
Microcontroller ATmega328P Operating Voltage 5V Input Voltage (recommended) 7-12V Input Voltage (limit) 6-20V Digital I/O Pins 14 (of which 6 provide PWM output) PWM Digital I/O Pins 6 Analog Input Pins 6 DC Current per I/O Pin 20 mA DC Current for 3.3V Pin 50 mA Flash Memory 32 KB (ATmega328P) of which 0.5 KB used by bootloader SRAM 2 KB (ATmega328P) EEPROM 1 KB (ATmega328P) Clock Speed 16 MHz LED_BUILTIN 13 Length 68.6 mm Width 53.4 mm Weight 25 g -
Arduino Nano Original A000005
Original price was: ₹2,500.00.₹1,470.00Current price is: ₹1,470.00.Add to cartTech specs
Microcontroller ATmega328 Architecture AVR Operating Voltage 5 V Flash Memory 32 KB of which 2 KB used by bootloader SRAM 2 KB Clock Speed 16 MHz Analog IN Pins 8 EEPROM 1 KB DC Current per I/O Pins 20 mA (I/O Pins) Input Voltage 7-12V Digital I/O Pins 22 (6 of which are PWM) PWM Output 6 Power Consumption 19 mA PCB Size 18 x 45 mm Weight 7 g Product Code A000005 -
Arduino Nicla Sense ME ABX00050 – Tiny IoT Sensor Hub
Original price was: ₹5,530.00.₹5,100.00Current price is: ₹5,100.00.Read moreKey Features
✅ Bosch BHI260AP: Smart 6-axis IMU with embedded AI for motion detection & gesture recognition.
✅ Bosch BMM150: 3-axis magnetometer for accurate heading and orientation.
✅ Bosch BMP390: High-resolution pressure sensor for accurate altitude detection.
✅ Bosch BME688: Environmental sensor for gas, humidity, temperature, and barometric pressure.
✅ Powerful MCU: nRF52832 (ARM Cortex-M4 @ 64 MHz, BLE 5.0) with 512 KB Flash, 64 KB RAM.
✅ Edge AI Ready: Run TinyML models for real-time analysis on-device.
✅ Tiny footprint: 22.86 x 22.86 mm (0.9 x 0.9 inches).
✅ Compatible: Works standalone or with Portenta/Arduino MKR boards.
✅ Ultra-low power consumption: Suitable for battery-powered IoT edge nodes.
