SIM800L GPRS GSM Module TTL Serial Port with Antenna
Original price was: ₹350.00.₹193.00Current price is: ₹193.00.
Features :
- TTL serial port for serial port, you can link directly to the micro-controller.
- Don’t need MAX232.
- Power module automatically boots, homing network.
- Onboard signal lights all the way.
- It flashes slowly when there is a signal, it flashes quickly when there is no signal.
Only 1 left in stock
This is Small SIM800L GPRS GSM Module Micro SIM Card Core Board Quad-band TTL Serial Port with the antenna, in this module two antennas have been included.
SIM800L GSM/GPRS module is a miniature GSM modem, which can be integrated into a great number of IoT projects. You can use this module to accomplish almost anything a normal cell phone can; SMS text messages, make or receive phone calls, connecting to the internet through GPRS, TCP/IP, and more! To top it off, the module supports quad-band GSM/GPRS network, meaning it works pretty much anywhere in the world
First Antenna is made of wire (which solders directly to NET pin on PCB) – very useful in narrow places.
Second Antenna – PCB antenna – with double-sided tape and attached pigtail cable with IPX connector. This one has better performance and allows to put your module inside a metal case – as long the antenna is outside.
Caution: Use a resistor divider circuit before interfacing it with Arduino to avoid the damage to the module.
| Weight | 10 g |
|---|
Related products
-
Arduino Portenta Breakout Board ASX00031
Original price was: ₹5,170.00.₹4,100.00Current price is: ₹4,100.00.Read moreFeatures
- Power ON Button
- Boot mode DIP switch
- Connectors
– USBA
– RJ45 up to 1Gb/s
– Micro SD card
– MIPI 20T JTAG with trace capability - Power
– CR2032 RTC Lithium Battery backup
– External power terminal block - I/O
– Break out all Portenta High Density connector signals
– Male/female HD connectors allow interposing breakout between Portenta and shield to debug signals - Compatibility
– Standard Portenta High Density connector pinout - Safety information
– Class A
-
NODEMCU – ESP8266 Wifi Development Board
Original price was: ₹200.00.₹150.00Current price is: ₹150.00.Read moreNodeMCU is a IoT Module based on ESP8266 wifi Module. NodeMCU uses Lua Scripting language and is an open source Internet of Things (IoT) platform. This modules has CH340g USB to TTL IC.
Features of Node-MCU IoT Module:
- Open source IoT Platform
- Easily Programmable
- Low cost & Simple to Implement
- WI-FI enabled
Specification of Node-MCU IoT Module:
- It is based on ESP8266, integrates GPIO, PWM, IIC, 1-Wire and ADC all in one board.
- Power your development in the fastest way combining with NodeMCU Firmware!
- USB-TTL included, plug&play
- 10 GPIO, every GPIO can be PWM, I2C, 1-wire
-
Arduino GIGA R1 WiFi (ABX00063)
Original price was: ₹7,700.00.₹5,880.00Current price is: ₹5,880.00.Add to cartFeatures
- STM32H747XI dual-core (Cortex-M7 + Cortex-M4) microcontroller
- Built-in Wi-Fi and Bluetooth connectivity
- 76 digital I/O pins and 12 analog inputs for expanded interfacing
- MicroSD card slot and USB host support
- Compatible with Arduino and MicroPython environments
- Supports advanced AI and edge computing workloads
- USB-C power and programming interface
- Onboard camera interface for computer vision applications
-
Breadboard GL-12 840 Tie Points
Original price was: ₹229.00.₹49.00Current price is: ₹49.00.Add to cartFeatures
- 840 Tie Points – Plenty of room for ICs, components, and jumper wires.
- Dual Power Rails – Efficient power distribution for multiple components.
- Durable Build – ABS plastic housing with nickel-plated phosphor bronze contacts.
- Reusable & Solderless – Quickly change or adjust circuits without damaging parts.
- Expandable Design – Interlocking edges allow connection with additional breadboards.
- Self-Adhesive Backing – Securely mount on any flat surface or project base.
