BMP280 Barometric Pressure and Altitude Sensor I2C/SPI Module
Original price was: ₹65.00.₹25.00Current price is: ₹25.00.
Features:
- High-precision BMP280 pressure sensor
- Measures barometric pressure and altitude
- Supports I2C and SPI communication
- Wide operating voltage: 1.8V – 3.6V
- Low power consumption, compact design
- Compatible with Arduino, Raspberry Pi, ESP32, STM32, etc.
- Temperature compensation for accurate readings
In stock
BMP280 Barometric Pressure and Altitude Sensor I2C/SPI Module is a cheapest and tiny Atmospheric Sensor Breakout to measure barometric pressure, and temperature readings all without taking up too much space. Basically, anything you need to know about atmospheric conditions you can find out from this tiny breakout. The BMP280 Breakout has been designed to be used in indoor/outdoor navigation, weather forecasting, home automation, and even personal health and wellness monitoring.
BMP280 Barometric Pressure and Altitude Sensor I2C/SPI Module
This module uses an environmental sensor manufactured by Bosch with temperature, a barometric pressure sensor that is the next generation upgrade to the popular BMP085/BMP180/BMP183 Sensor. This sensor is great for all sorts of weather sensing and can even be used in both I2C and SPI; This precision sensor from Bosch is the best low-cost, precision sensing solution for measuring barometric pressure with ±1 hPa absolute accuracy, and temperature with ±1.0°C accuracy. Because pressure changes with altitude and the pressure measurements are so good; you can also use it as an altimeter with ±1 meter accuracy.
The BMP280 is the next-generation of sensors and is the upgrade to the BMP085/BMP180/BMP183 – with a low altitude noise of 0.25m and the same fast conversion time. It has the same specifications but can use either I2C or SPI. For simple easy wiring, go with I2C. If you want to connect a bunch of sensors without worrying about I2C address collisions, go with SPI.
Note: This Product is available in two different variants (BMP280 and HW-611) with the same working we will ship it randomly.
Specifications and Features :
- Get more precise temperature, atmospheric pressure values, and approximate altitude data
- Enhancement of GPS navigation (e.g. time-to first-fix improvement, dead-reckoning, slope detection)
- Indoor navigation (floor detection, elevator detection)
- Outdoor navigation, leisure and sports applications
- Weather forecast
- Health care applications (e.g. spirometry)
- Vertical velocity indication (e.g. rise/sink speed)
- Libraries and tutorials available for Arduino and other microcontrollers
- Operating Voltage: 1.71V to 3.6V – would typically be operated from 3.3V
- Operating Temperature: -40 to +85 deg. Celsius (full accuracy between 0 and +65 deg. C)
- Peak current: 1.12mA
- Operating Pressure: 300 hPa to 1100 hPa
- Accuracy between 700 to 900hPa and 25 to 40 deg. C: ±0.12hPa and ±1.0m
Applications:
- Weather monitoring stations
- Altimeters and barometers
- Drones and UAV flight controllers
- IoT and smart home devices
- GPS navigation accuracy enhancement
- Environmental monitoring systems
Package Includes :
1 x BMP280 Barometric Pressure and Altitude Sensor I2C/SPI Module.
1 x Header set (Without Soldered).
| Weight | 5 g |
|---|
Related products
-
Infrared Obstacle Avoidance IR Sensor Module (Active Low)
Original price was: ₹80.00.₹22.00Current price is: ₹22.00.Add to cartFeature Details Sensor Type Infrared Obstacle Sensor (Active Low) Output Type Digital (Active Low) Operating Voltage 3.3V – 5V DC Detection Range 2cm – 30cm (adjustable via potentiometer) Comparator LM393 (ensures stable, noise-free output) Interface 3-pin: VCC, GND, OUT Working Current < 20 mA Logic Level Compatible with Arduino, Raspberry Pi, ESP32, and other MCUs Mounting PCB with mounting holes for easy installation Operating Temperature -10°C to 70°C Applications Line-following robots, obstacle-avoiding robots, smart home automation, industrial automation, STEM learning Package Contents 1 × Infrared Obstacle Sensor Module -
Arduino Nicla Sense ME ABX00050 – Tiny IoT Sensor Hub
Original price was: ₹5,530.00.₹5,100.00Current price is: ₹5,100.00.Read moreKey Features
✅ Bosch BHI260AP: Smart 6-axis IMU with embedded AI for motion detection & gesture recognition.
✅ Bosch BMM150: 3-axis magnetometer for accurate heading and orientation.
✅ Bosch BMP390: High-resolution pressure sensor for accurate altitude detection.
✅ Bosch BME688: Environmental sensor for gas, humidity, temperature, and barometric pressure.
✅ Powerful MCU: nRF52832 (ARM Cortex-M4 @ 64 MHz, BLE 5.0) with 512 KB Flash, 64 KB RAM.
✅ Edge AI Ready: Run TinyML models for real-time analysis on-device.
✅ Tiny footprint: 22.86 x 22.86 mm (0.9 x 0.9 inches).
✅ Compatible: Works standalone or with Portenta/Arduino MKR boards.
✅ Ultra-low power consumption: Suitable for battery-powered IoT edge nodes. -
DHT11 Temperature And Humidity Sensor Module with LED
Original price was: ₹125.00.₹55.00Current price is: ₹55.00.Add to cartFeatures:
- Input Supply voltage (VDC): 3.3 ~ 5
- Supply Current (mA): measurement 0.3mA standby 60μA.
- Temperature measurement range: 0~50 degrees
- Temperature measurement error: ±2 degrees
- Humidity measurement range: 20%~95%RH
- Humidity measurement error: ±5%RH
-
DHT22 Digital Temperature and Humidity Sensor Module AM2302
Original price was: ₹250.00.₹108.00Current price is: ₹108.00.Add to cart🔹 DHT22 Temperature & Humidity Sensor – Key Features
-
High-Precision Environmental Sensing: Accurately measures temperature (-40°C to +80°C) and humidity (0–100% RH) for reliable data in IoT and automation projects.
-
Digital Single-Bus Output: Simplifies integration with Arduino, ESP32, Raspberry Pi, STM32, and other popular microcontrollers.
-
Wide Measurement Range: Handles extreme temperature and humidity conditions, suitable for indoor and outdoor monitoring.
-
Low Power & Long-Term Stability: Energy-efficient design ensures consistent performance in battery-powered or continuous monitoring systems.
-
Pre-Calibrated & Ready-to-Use: Factory-calibrated module guarantees accurate readings straight out of the box, saving setup time.
-
Seamless Microcontroller Compatibility: Ideal for IoT projects, smart homes, weather stations, greenhouses, and AI-driven environmental monitoring.
-
Reliable and Durable: Designed for long-term usage with strong anti-interference capability, ensuring trustworthy data for professionals, educators, and hobbyists.
-
