BMP180 Digital Barometric Pressure Sensor Module
Original price was: ₹180.00.₹36.00Current price is: ₹36.00.
Features
- Measures barometric pressure, altitude & temperature
- High precision: ±1 hPa (pressure), ±0.5°C (temperature)
- Pressure range: 300–1100 hPa
- Operating voltage: 1.8V–3.6V (3.3V typical)
- I²C interface for easy integration
- Low power consumption (<1 μA in standby)
- Compact & lightweight (~2 g)
- Compatible with Arduino, Raspberry Pi & other microcontrollers
In stock
BMP180 Digital Barometric Pressure Sensor Module is used for measuring barometric pressure and altitude. It also has a temperature sensor for temperature compensation of pressure measurements. It uses push sensors for the BMP180. It offers a pressure measuring range of 300 to 1100 hPa with a relative pressure error of 0.12 hPa.
BMP 180 is a barometric pressure sensor with an I2C interface. Barometric pressure sensors measure the absolute pressure of the air around them. This pressure varies with both the weather and altitude. Depending on how you interpret the data, you can monitor changes in the weather, measure altitude, or any other tasks that require an accurate pressure reading.
Note: (1 hPa ≡ 100 Pa) which is equal to 0.001 bar (atmospheric)
Features :
- I2C interface.
- Max I2C Speed: 3.4Mhz
- Pressure conversion time: 5msec
- Fully calibrated.
- Small and easy to use.
- Voltage supply: 1.8 ~ 3.6 V
- Current supply: 5µA at 1Hz
- Peak current: 1000µA
- Very low noise: up to 0.02hPa (17cm)
- Pressure Range: 300hPa to 1100hPa (+9000m to -500m)
Package Includes :
- 1 x BMP180 Digital Barometric Pressure Sensor Module
- 1 x 4Burg Connector(Straight)
| Input Voltage | 1.8 ~ 3.6 V |
| Interface Type | I2C |
| Max I2C Speed | 3.4Mhz |
| PCB Size ( L x W ) | 1.3 x 1.2 cm |
| Peak Current | 1000µA |
| Pressure conversion time | 5 ms |
| Pressure Range | 300hPa to 1100hPa |
| Weight | 5 g |
|---|
Related products
-
Breadboard GL-12 840 Tie Points
Original price was: ₹229.00.₹49.00Current price is: ₹49.00.Add to cartFeatures
- 840 Tie Points – Plenty of room for ICs, components, and jumper wires.
- Dual Power Rails – Efficient power distribution for multiple components.
- Durable Build – ABS plastic housing with nickel-plated phosphor bronze contacts.
- Reusable & Solderless – Quickly change or adjust circuits without damaging parts.
- Expandable Design – Interlocking edges allow connection with additional breadboards.
- Self-Adhesive Backing – Securely mount on any flat surface or project base.
-
1 Channel 5V Relay Module
Original price was: ₹55.00.₹33.00Current price is: ₹33.00.Add to cartFeatures :
- 1 channel relay board
- Operating Voltage 5V
- Pull-down circuit for avoidance of malfunction
- Power supply indicator lamp
- Control indicator lamp
- Indicator for Relay output status
- Max Current : 20mA
- Relay Contact Current Capacity at AC250V: 10A
- Relay Contact Current Capacity at DC5V: 10A
- One normally closed contact and one normally open contact
- Triode drive, increasing relay coil
- High impedance controller pin
- Can Be controlled various appliances & other Equipment With Large current.
- Standard TTL Level logic controlled (AVR, Arduino, 8051, PIC, ARM)
- The module is compliant with international safety standards, control and load areas isolation trenches;
* Product Image is shown for illustrative purposes only and may differ from actual product.
-
Dual Axis XY Joystick Module
Original price was: ₹99.00.₹49.00Current price is: ₹49.00.Add to cartJoystick Module Features and Specifications:
- Compatible with Arduino or with most of the microcontrollers
- Two independent Potentiometers – one for each axis ( X and Y)
- Auto return to center position
- Low weight
- Cup-type Knob
- Operating Voltage: 5V
- Internal Potentiometer value: 10k
- 2.54mm pin interface leads
- Dimensions: 1.57 in x 1.02 in x 1.26 in (4.0 cm x 2.6 cm x 3.2 cm)
- Operating temperature: 0 to 70 °C
-
4 Channel 5V Relay Module with Optocoupler
Original price was: ₹250.00.₹118.00Current price is: ₹118.00.Add to cartFeatures – 5V 4-Channel Relay Module with Optocoupler
-
4 Independent Channels – Control multiple devices simultaneously with precision.
-
Wide Operating Voltage – Supports 3.3V to 5V input, compatible with Arduino, ESP32, Raspberry Pi, and other microcontrollers.
-
High-Impedance Controller Pins – Ensures minimal current draw from the microcontroller and safe operation.
-
AC/DC Load Control – Easily switch 220V AC appliances or DC devices safely.
-
Dual Contacts – Each relay includes one normally open (NO) and one normally closed (NC) contact for flexible control.
-
Triode Drive for Relay Coil – Enhances switching efficiency and reduces malfunction risk.
-
Pull-Down Circuit – Prevents false triggering and ensures stable performance in noisy environments.
-
Indicator LEDs – Power and relay status indicators provide real-time visual feedback.
-
Clear Terminal Layout – Input signal, common terminal, and start conduction terminals are clearly marked for easy wiring.
-
Appliance Control Ready – Perfect for controlling lights, fans, motors, and other household or industrial appliances.
-
International Safety Compliance – Isolation trenches between control and load areas ensure safe operation and reduce risk of electrical faults.
-
Durable & Reliable – Designed for long-term use in smart automation, IoT, and industrial projects.
-
