Arduino Uno Rev3 Original A000066
Original price was: ₹2,500.00.₹1,560.00Current price is: ₹1,560.00.
Tech specs
| Microcontroller | ATmega328P |
| Operating Voltage | 5V |
| Input Voltage (recommended) | 7-12V |
| Input Voltage (limit) | 6-20V |
| Digital I/O Pins | 14 (of which 6 provide PWM output) |
| PWM Digital I/O Pins | 6 |
| Analog Input Pins | 6 |
| DC Current per I/O Pin | 20 mA |
| DC Current for 3.3V Pin | 50 mA |
| Flash Memory | 32 KB (ATmega328P) of which 0.5 KB used by bootloader |
| SRAM | 2 KB (ATmega328P) |
| EEPROM | 1 KB (ATmega328P) |
| Clock Speed | 16 MHz |
| LED_BUILTIN | 13 |
| Length | 68.6 mm |
| Width | 53.4 mm |
| Weight | 25 g |
In stock
Arduino Uno is a microcontroller board based on the ATmega328P (datasheet). It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz ceramic resonator (CSTCE16M0V53-R0), a USB connection, a power jack, an ICSP header and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.. You can tinker with your Uno without worrying too much about doing something wrong, worst case scenario you can replace the chip for a few dollars and start over again.
“Uno” means one in Italian and was chosen to mark the release of Arduino Software (IDE) 1.0. The Uno board and version 1.0 of Arduino Software (IDE) were the reference versions of Arduino, now evolved to newer releases. The Uno board is the first in a series of USB Arduino boards, and the reference model for the Arduino platform; for an extensive list of current, past or outdated boards see the Arduino index of boards.
| Weight | 25 g |
|---|
Related products
-
Arduino UNO एक R4 Minima
Original price was: ₹2,000.00.₹590.00Current price is: ₹590.00.Add to cartArduino UNO एक R4 Minima – Features
🔹 32-bit Microcontroller: Renesas RA4M1 (Arm Cortex-M4, 48 MHz)
🔹 Flash Memory: 256 KB
🔹 SRAM: 32 KB
🔹 Operating Voltage: 5V
🔹 Input Voltage (recommended): 6-12V
🔹 USB-C Connector: Modern, reliable connectivity
🔹 Digital I/O Pins: 14 (6 PWM capable)
🔹 Analog Input Pins: 6
🔹 DAC (Digital-to-Analog Converter): 1 channel
🔹 Communication: UART, I2C, SPI
🔹 LED on Pin 13: For easy debugging
🔹 Real-Time Clock (RTC): Built-in
🔹 CAN Bus Support: Yes (via external transceiver)
🔹 Form Factor: Same as classic UNO (easy upgrade path)
🔹 Power Consumption: Low-power optimized
🔹 Improved Processing Power: Faster than UNO R3 for advanced projects
🔹 Breadboard Friendly: For prototyping and STEM learning. -
W1209 Digital Temperature Controller Thermostat Module
Original price was: ₹120.00.₹80.00Current price is: ₹80.00.Add to cartW1209 Module Specifications:- Input Power (DC): 12V
- Measuring Inputs: NTC (10K 0.5%)
- Waterproof Sensor: 0.5M
- Output: 1 Channel Relay Output,
- Capacity: 10A
- Temperature Control Range: -50 ~ +110 C
- Resolution at -9.9 to 99.9: 0.1 C
- Resolution at all other temperatures: 1 C
- Measurement Accuracy: 0.1 C
- Control Accuracy: 0.1 C
- Refresh Rate: 0.5 Seconds
-
NODEMCU – ESP8266 Wifi Development Board
Original price was: ₹200.00.₹150.00Current price is: ₹150.00.Read moreNodeMCU is a IoT Module based on ESP8266 wifi Module. NodeMCU uses Lua Scripting language and is an open source Internet of Things (IoT) platform. This modules has CH340g USB to TTL IC.
Features of Node-MCU IoT Module:
- Open source IoT Platform
- Easily Programmable
- Low cost & Simple to Implement
- WI-FI enabled
Specification of Node-MCU IoT Module:
- It is based on ESP8266, integrates GPIO, PWM, IIC, 1-Wire and ADC all in one board.
- Power your development in the fastest way combining with NodeMCU Firmware!
- USB-TTL included, plug&play
- 10 GPIO, every GPIO can be PWM, I2C, 1-wire
-
Arduino Portenta X8 – ABX00049
Original price was: ₹22,300.00.₹15,400.00Current price is: ₹15,400.00.Read moreFeatures
- Combines Linux and real-time cores for flexibility and performance
- NXP® i.MX 8M Mini Cortex®-A53 quad-core + M7 real-time processor
- 4GB LPDDR4 RAM, 16GB eMMC storage
- Wi-Fi and Bluetooth 5.0 connectivity
- USB-C programming and power port
- Industrial-grade reliability and security features
- Supports Edge AI and machine learning applications
