Arduino Nicla Sense ME ABX00050 – Tiny IoT Sensor Hub
Original price was: ₹5,530.00.₹5,100.00Current price is: ₹5,100.00.
Key Features
✅ Bosch BHI260AP: Smart 6-axis IMU with embedded AI for motion detection & gesture recognition.
✅ Bosch BMM150: 3-axis magnetometer for accurate heading and orientation.
✅ Bosch BMP390: High-resolution pressure sensor for accurate altitude detection.
✅ Bosch BME688: Environmental sensor for gas, humidity, temperature, and barometric pressure.
✅ Powerful MCU: nRF52832 (ARM Cortex-M4 @ 64 MHz, BLE 5.0) with 512 KB Flash, 64 KB RAM.
✅ Edge AI Ready: Run TinyML models for real-time analysis on-device.
✅ Tiny footprint: 22.86 x 22.86 mm (0.9 x 0.9 inches).
✅ Compatible: Works standalone or with Portenta/Arduino MKR boards.
✅ Ultra-low power consumption: Suitable for battery-powered IoT edge nodes.
Out of stock
Applications
- Predictive maintenance (vibration analysis, equipment monitoring)
- Air quality and environmental monitoring
- Wearable sensor devices
- Smart home and building automation
- Gesture and motion detection
- Portable weather stations
Description
The Arduino Nicla Sense ME (ABX00050) is a highly integrated, tiny IoT sensor hub that combines motion and environmental sensing with edge AI capabilities. Featuring Bosch’s latest sensors—including the BHI260AP IMU with embedded AI, the BMM150 magnetometer, BMP390 pressure sensor, and BME688 gas/environmental sensor—Nicla Sense ME delivers a rich data stream for your next IoT and machine learning projects.
Its ultra-low power design, Bluetooth 5.0 connectivity, and compatibility with Arduino Cloud and Portenta ecosystem make it ideal for developing battery-powered predictive maintenance systems, environmental monitoring stations, and smart devices that need accurate, real-time environmental and motion data.
The board is designed to handle TinyML models directly on the device, enabling real-time inference at the edge without continuous cloud connectivity, reducing latency and power consumption in your IoT solutions.
Technical Specifications
| Specification | Details |
|---|---|
| Microcontroller | nRF52832 (ARM Cortex-M4 @ 64 MHz) |
| Flash / RAM | 512 KB Flash / 64 KB RAM |
| Connectivity | Bluetooth 5.0 |
| Sensors | BHI260AP (6-axis IMU + AI), BMM150 (magnetometer), BMP390 (pressure), BME688 (gas, temp, humidity) |
| Operating Voltage | 3.3V |
| Input Voltage (VIN) | 5V |
| Dimensions | 22.86 x 22.86 mm |
| Weight | ~2 grams |
| Communication Interfaces | SPI, I2C, UART, BLE |
| Mounting | Castellated edges for soldering or use with pin headers |
| Weight | 2 g |
|---|
Related products
-
2 Channel 5V Relay Module with Optocoupler
Original price was: ₹80.00.₹62.00Current price is: ₹62.00.Add to cart⚡ 2 Channel 5V Relay Module with Optocoupler – Key Specifications
-
High-Current Relay Performance: Each relay can safely handle AC 250V up to 10A and DC 5V up to 10A, making it suitable for both household and industrial automation.
-
LED Status Indicators: Two built-in LEDs clearly show when each relay is activated, providing instant visual feedback for testing and operation.
-
Logic-Level Compatibility: Designed to work with 3.3V or 5V logic signals, making it fully compatible with Arduino, ESP32, Raspberry Pi, and other microcontrollers.
-
Opto-Isolation Protection: Equipped with optocoupler circuitry, this module protects your microcontroller from high-voltage spikes and electrical noise, ensuring safe, reliable, and stable switching.
-
User-Friendly Installation: Compact PCB with labeled terminals and indicator LEDs for quick setup and safe wiring.
Note: Product images are for illustrative purposes only and may differ slightly from the actual module. -
-
1 Channel 5V Relay Module
Original price was: ₹55.00.₹33.00Current price is: ₹33.00.Add to cartFeatures :
- 1 channel relay board
- Operating Voltage 5V
- Pull-down circuit for avoidance of malfunction
- Power supply indicator lamp
- Control indicator lamp
- Indicator for Relay output status
- Max Current : 20mA
- Relay Contact Current Capacity at AC250V: 10A
- Relay Contact Current Capacity at DC5V: 10A
- One normally closed contact and one normally open contact
- Triode drive, increasing relay coil
- High impedance controller pin
- Can Be controlled various appliances & other Equipment With Large current.
- Standard TTL Level logic controlled (AVR, Arduino, 8051, PIC, ARM)
- The module is compliant with international safety standards, control and load areas isolation trenches;
* Product Image is shown for illustrative purposes only and may differ from actual product.
-
W1209 Digital Temperature Controller Thermostat Module
Original price was: ₹120.00.₹80.00Current price is: ₹80.00.Add to cartW1209 Temperature Controller Module – Specifications
-
Type: Digital temperature controller / digital temp controller
-
Input Power: 12V DC
-
Measuring Input: NTC 10K 0.5% sensor
-
Waterproof Sensor: 0.5M probe
-
Output: 1-channel relay, 10A capacity
-
Temperature Range: -50°C to +110°C
-
Resolution: 0.1°C (-9.9 to 99.9°C), 1°C for other ranges
-
Measurement Accuracy: ±0.1°C
-
Control Accuracy: ±0.1°C
-
Refresh Rate: 0.5 seconds
-
-
5V Buzzer Module
Original price was: ₹50.00.₹30.00Current price is: ₹30.00.Add to cartFeatures:
- Operates on 5V DC, compatible with Arduino and microcontrollers
- Loud and clear sound output for alerts and indicators
- Compact size for easy integration into DIY projects
- Simple 3-pin connection (VCC, GND, Signal)
- Low current consumption, energy-efficient
- Can be used with PWM for sound control
- Onboard driver circuit for easy triggering
- Ideal for alarms, timers, and notification systems
Reviews
There are no reviews yet.