Arduino Nano Original A000005
Original price was: ₹2,500.00.₹1,470.00Current price is: ₹1,470.00.
Tech specs
| Microcontroller | ATmega328 |
| Architecture | AVR |
| Operating Voltage | 5 V |
| Flash Memory | 32 KB of which 2 KB used by bootloader |
| SRAM | 2 KB |
| Clock Speed | 16 MHz |
| Analog IN Pins | 8 |
| EEPROM | 1 KB |
| DC Current per I/O Pins | 20 mA (I/O Pins) |
| Input Voltage | 7-12V |
| Digital I/O Pins | 22 (6 of which are PWM) |
| PWM Output | 6 |
| Power Consumption | 19 mA |
| PCB Size | 18 x 45 mm |
| Weight | 7 g |
| Product Code | A000005 |
In stock
The Arduino Nano is a small, complete, and breadboard-friendly board based on the ATmega328 (Arduino Nano 3.x). It has more or less the same functionality of the Arduino Duemilanove, but in a different package. It lacks only a DC power jack, and works with a Mini-B USB cable instead of a standard one.
Applications:
- Compact robotics projects
- Wearable electronics
- IoT and sensor-based systems
- Educational and embedded systems learning
- DIY portable electronics projects
| Weight | 7 g |
|---|
Related products
-
Arduino Portenta Breakout Board ASX00031
Original price was: ₹5,170.00.₹4,100.00Current price is: ₹4,100.00.Read moreFeatures
- Power ON Button
- Boot mode DIP switch
- Connectors
– USBA
– RJ45 up to 1Gb/s
– Micro SD card
– MIPI 20T JTAG with trace capability - Power
– CR2032 RTC Lithium Battery backup
– External power terminal block - I/O
– Break out all Portenta High Density connector signals
– Male/female HD connectors allow interposing breakout between Portenta and shield to debug signals - Compatibility
– Standard Portenta High Density connector pinout - Safety information
– Class A
-
Infrared Obstacle Avoidance IR Sensor Module (Active Low)
Original price was: ₹80.00.₹22.00Current price is: ₹22.00.Add to cartFeatures:
- Easy to assemble and use
- Onboard detection indication
- The effective distance range of 2cm to 80cm
- A preset knob to fine-tune the distance range
- If there is an obstacle, the indicator lights on the circuit board.
- Infrared obstacle detection with active low output
- Adjustable detection distance via onboard potentiometer
- High sensitivity and fast response time
- Compact and easy-to-interface module
- Compatible with Arduino, Raspberry Pi, and other microcontrollers
- Low power consumption, stable performance
-
Arduino Nano 33 IoT ABX00027
Original price was: ₹2,500.00.₹1,599.00Current price is: ₹1,599.00.Add to cartFeatures:
- Wi-Fi & Bluetooth (u-blox NINA-W102 module)
- ARM Cortex-M0+ 32-bit MCU (SAMD21, 48 MHz)
- Hardware crypto chip (ATECC608A) for secure IoT
- 6-axis IMU (LSM6DS3 accelerometer + gyroscope)
- Compact Nano form factor (45 × 18 mm)
- 14 digital I/O, 8 analog inputs, 1 DAC output
- Native USB for programming & communication
- Operates at 3.3 V logic level
-
Arduino Nicla Sense ME ABX00050 – Tiny IoT Sensor Hub
Original price was: ₹5,530.00.₹5,100.00Current price is: ₹5,100.00.Read moreKey Features
✅ Bosch BHI260AP: Smart 6-axis IMU with embedded AI for motion detection & gesture recognition.
✅ Bosch BMM150: 3-axis magnetometer for accurate heading and orientation.
✅ Bosch BMP390: High-resolution pressure sensor for accurate altitude detection.
✅ Bosch BME688: Environmental sensor for gas, humidity, temperature, and barometric pressure.
✅ Powerful MCU: nRF52832 (ARM Cortex-M4 @ 64 MHz, BLE 5.0) with 512 KB Flash, 64 KB RAM.
✅ Edge AI Ready: Run TinyML models for real-time analysis on-device.
✅ Tiny footprint: 22.86 x 22.86 mm (0.9 x 0.9 inches).
✅ Compatible: Works standalone or with Portenta/Arduino MKR boards.
✅ Ultra-low power consumption: Suitable for battery-powered IoT edge nodes.
