Sale!
SMBJ30CA TVS Diode – Bidirectional – SMB (DO-214AA)
Original price was: ₹4.50.₹2.50Current price is: ₹2.50.
- ESD Protection Diodes / TVS Diodes
- Power Dissipation: 600W
- Break Down Voltage VBR: 36.80V(Max)
- Maximum Clamping Voltage (V): 48.4V
- Maximum Reverse Stand-Off Voltage (V): 30V
-
Peak pulse current Ipp: 12.4A
- Maximum Reverse Leakage Current (uA): 5uA
- Direction Type: Bi-Directional
3000 in stock
Description
This SMBJ30CA TVS Diode use in sensitive electronics protection against voltage transients induced by inductive load switching and lighting on ICs, MOSFET, signal lines of sensor units specifically for protecting 30V supplied sensitive equipment against transient over voltages.
Specifications:
- Built-in strain relief
- Excellent clamping capability
- Low profile package
- For surface mount application
- High temperature soldering guaranteed: 260 C / 10 seconds at terminals
- Typical IR less than 1µA above 10V
- Fast response time: Typically less than 1.0ps from 0 volt to BV min.
You may also like…
-
RP2040 Microcontroller IC
Original price was: ₹94.00.₹54.50Current price is: ₹54.50.Read more- Dual ARM Cortex-M0+ @ 133MHz
- 264kB on-chip SRAM in six independent banks
- Support for up to 16MB of off-chip Flash memory via dedicated QSPI bus
- DMA controller
- Fully-connected AHB crossbar
- Interpolator and integer divider peripherals
- On-chip programmable LDO to generate the core voltage
- 2 on-chip PLLs to generate USB and core clocks
- 30 GPIO pins, 4 of which can be used as analog inputs
Related products
-
SMBJ18CA TVS Diode – Bidirectional – SMB (DO-214AA)
Original price was: ₹4.50.₹2.50Current price is: ₹2.50.Add to cart- Maximum Reverse Stand-Off Voltage (V): 18V
- Direction Type: Bi-Directional
- Break Down Voltage VBR: 22.10V(Max)
- Maximum Clamping Voltage (V): 29.2V
-
Peak pulse current Ipp: 20.5A
- Maximum Reverse Leakage Current (uA): 5uA
-
SMCJ40CA Bi-Directional TVS Diode
Original price was: ₹8.00.₹5.00Current price is: ₹5.00.Add to cart- Built-in strain relief
- Excellent clamping capability
- Low incremental surge resistance
- Typical IR less than 1μA when VBR min>12V
- Fast response time: typically less than 1.0ps from 0V to BV min
- 1500W peak pulse power capability at 10/1000μs waveform, repetition rate (duty cycles):0.01%
Reviews
There are no reviews yet.