MPU6050 6-Axis Gyro Accelerometer Sensor Module
Original price was: ₹299.00.₹160.00Current price is: ₹160.00.
Key Features
- 6-axis motion sensing (3-axis gyro + 3-axis accelerometer)
- Built-in DMP for advanced motion processing
- Wide measurement range (±2g–±16g accel, ±250–±2000°/s gyro)
- I2C interface, up to 400kHz
- Low power consumption
- High accuracy with low noise
- Onboard 3.3V regulator (on breakout board variants)
- Compact & easy to interface with Arduino, ESP32, Raspberry Pi
In stock
MPU6050 6-Axis Gyro Accelerometer Sensor Module
The MPU6050 is a popular 6-axis motion tracking sensor module that integrates a 3-axis gyroscope and 3-axis accelerometer in a single chip. It features a high-precision Digital Motion Processor (DMP) that performs complex motion calculations internally, reducing load on the microcontroller.
This sensor communicates via the I2C interface and is widely used in Arduino, ESP32, Raspberry Pi, robotics, drones, wearables, balancing robots, gesture-based projects and IMU applications.
With its compact design, low power consumption, and excellent measurement stability, the MPU-6050 is one of the most reliable and cost-effective IMU modules for beginner and advanced electronics projects.
Many hobbyists and professionals prefer the MPU6050 6-Axis Gyro Accelerometer Sensor Module for projects that require precise motion tracking and data collection.
The MPU6050 6-Axis Gyro Accelerometer Sensor Module is well-known for its accuracy and versatility. It is essential for various applications, enhancing the functionality of devices significantly.
Key Features
- 6-axis motion sensing (3-axis gyro + 3-axis accelerometer)
- Built-in DMP for advanced motion processing
- Wide measurement range (±2g–±16g accel, ±250–±2000°/s gyro)
- I2C interface, up to 400kHz
- Low power consumption
- High accuracy with low noise
- Onboard 3.3V regulator (on breakout board variants)
- Compact & easy to interface with Arduino, ESP32, Raspberry Pi
Specifications
- Gyroscope Range: ±250 / ±500 / ±1000 / ±2000 °/sec
- Accelerometer Range: ±2g / ±4g / ±8g / ±16g
- Operating Voltage: 3.3V – 5V
- Communication: I2C (Address: 0x68 or 0x69)
- Sampling Rate: Up to 1kHz
- Temperature Sensor: Built-in
- Dimensions: ~20 × 15 × 2 mm (may vary by board)
Applications
In summary, the MPU6050 6-Axis Gyro Accelerometer Sensor Module stands out as a reliable choice for developers aiming to create innovative motion-sensing solutions.
With its advanced features, the MPU6050 6-Axis Gyro Accelerometer Sensor Module is suitable for use in applications like robotics, where accurate motion detection is paramount.
The MPU6050 6-Axis Gyro Accelerometer Sensor Module is not only versatile but also essential for enhancing the performance of various electronic devices.
- Drones & quadcopters
- Self-balancing robots
- Gesture-controlled devices
- Robotics motion control
- Mobile & IoT devices
- Wearable motion trackers
- VR/AR head tracking
- Automotive motion measurement
- IMU stabilization systems
| Weight | 20 g |
|---|
Related products
-
MQ-2 Gas Sensor Module For LPG, Propane, Methane, Smoke
Original price was: ₹150.00.₹99.00Current price is: ₹99.00.Add to cartFeatures:
- Detects LPG, CH4 (methane), H2, CO, smoke, and other combustible gases.
- Wide detection range with high sensitivity.
- Analog + digital outputs for easy interfacing.
- Built-in potentiometer to adjust sensitivity threshold.
- Compatible with Arduino, ESP8266, ESP32, and Raspberry Pi.
- Long life and low-cost solution for gas leakage detection.
- Simple 4-pin interface for quick prototyping.
-
BMP280 Barometric Pressure and Altitude Sensor I2C/SPI Module
Original price was: ₹65.00.₹25.00Current price is: ₹25.00.Add to cartFeatures:
- High-precision BMP280 pressure sensor
- Measures barometric pressure and altitude
- Supports I2C and SPI communication
- Wide operating voltage: 1.8V – 3.6V
- Low power consumption, compact design
- Compatible with Arduino, Raspberry Pi, ESP32, STM32, etc.
- Temperature compensation for accurate readings
-
Infrared Obstacle Avoidance IR Sensor Module (Active Low)
Original price was: ₹80.00.₹22.00Current price is: ₹22.00.Add to cartFeature Details Sensor Type Infrared Obstacle Sensor (Active Low) Output Type Digital (Active Low) Operating Voltage 3.3V – 5V DC Detection Range 2cm – 30cm (adjustable via potentiometer) Comparator LM393 (ensures stable, noise-free output) Interface 3-pin: VCC, GND, OUT Working Current < 20 mA Logic Level Compatible with Arduino, Raspberry Pi, ESP32, and other MCUs Mounting PCB with mounting holes for easy installation Operating Temperature -10°C to 70°C Applications Line-following robots, obstacle-avoiding robots, smart home automation, industrial automation, STEM learning Package Contents 1 × Infrared Obstacle Sensor Module -
DHT11 Temperature And Humidity Sensor Module with LED
Original price was: ₹125.00.₹55.00Current price is: ₹55.00.Add to cartFeatures:
- Input Supply voltage (VDC): 3.3 ~ 5
- Supply Current (mA): measurement 0.3mA standby 60μA.
- Temperature measurement range: 0~50 degrees
- Temperature measurement error: ±2 degrees
- Humidity measurement range: 20%~95%RH
- Humidity measurement error: ±5%RH
Reviews
There are no reviews yet.