LM393 Dual Comparator IC (SOP-8)
Original price was: ₹8.00.₹5.10Current price is: ₹5.10.
- Input Supply Voltage: 2.0 Vdc to 36 Vdc
- The LM393 is a dual voltage comparator IC
- The output can sink or source up to 16mA
- The input offset voltage is typically 2mV
Out of stock
- LM393 consists of two independent comparators internally.
- The circuit can operate on a single power supply with a wide voltage range and also supports dual power supplies source power supply.
- When using dual power supplies, the voltage difference between the two power supplies is between 2V and 18V and VCC is at least 1.5V higher than the input common mode voltage.
- The state current power consumption is independent of the supply voltage.
- The output can be connected to the open collector output of other devices.
Related products
-
LM393 Dual Comparator IC (MSOP-8)
Original price was: ₹14.00.₹9.00Current price is: ₹9.00.Read moreLM393 Low Power Low Offset Voltage Dual Comparator IC MSOP-8 Package
• Low Input Biasing Current: 25 nA
• Low Input Offset Current: ±5 nA
• Maximum Offset voltage: ±3 mV
• Wide Supply – Voltage Range: 2.0 V to 36 V – Single or Dual Supplies: ±1.0 V to ±18 V
• Very Low Supply Current Drain (0.4 mA) — Independent of Supply Voltage
• Input Common-Mode Voltage Range Includes Ground
• Differential Input Voltage Range Equal to the Power Supply Voltage
• Low Output Saturation Voltage: 250 mV at 4 mA
• Output Voltage Compatible with TTL, DTL, ECL, MOS and CMOS logic systems
-
LM393 Dual Comparator IC (DIP-8)
Original price was: ₹20.00.₹14.00Current price is: ₹14.00.Read moreLM393 Low Power Low Offset Voltage Dual Comparator IC DIP-8 Package
• Low Input Biasing Current: 25 nA
• Low Input Offset Current: ±5 nA
• Maximum Offset voltage: ±3 mV
• Wide Supply – Voltage Range: 2.0 V to 36 V – Single or Dual Supplies: ±1.0 V to ±18 V
• Very Low Supply Current Drain (0.4 mA) — Independent of Supply Voltage
• Input Common-Mode Voltage Range Includes Ground
• Differential Input Voltage Range Equal to the Power Supply Voltage
• Low Output Saturation Voltage: 250 mV at 4 mA
• Output Voltage Compatible with TTL, DTL, ECL, MOS and CMOS logic systems
Reviews
There are no reviews yet.