Dual Axis XY Joystick Module
Original price was: ₹99.00.₹49.00Current price is: ₹49.00.
Joystick Module Features and Specifications:
- Compatible with Arduino or with most of the microcontrollers
- Two independent Potentiometers – one for each axis ( X and Y)
- Auto return to center position
- Low weight
- Cup-type Knob
- Operating Voltage: 5V
- Internal Potentiometer value: 10k
- 2.54mm pin interface leads
- Dimensions: 1.57 in x 1.02 in x 1.26 in (4.0 cm x 2.6 cm x 3.2 cm)
- Operating temperature: 0 to 70 °C
In stock
This is a Dual Axis Joystick Module to measure position coordinates on the X and Y axis by moving the “hat”. Directional movements are controlled by simply two potentiometers of 10k ohm – one for each axis. This joystick also has a select button that is actuated when the joystick is press down.
Features:
- Dual-axis (X & Y) analog joystick for directional control.
- Push button switch included for extra functionality.
- Compatible with Arduino, ESP32, Raspberry Pi, and microcontrollers.
- Standard 2.54mm pins for easy breadboard and jumper wire use.
- Spring return mechanism for smooth centering.
- Compact and durable design for DIY and robotics projects.
Applications:
- Robotics control (robot car, robotic arm, drone gimbals).
- DIY game controllers and simulation setups.
- Arduino and Raspberry Pi projects for motion input.
- RC vehicle remote controls.
- Automation systems requiring manual analog input.
- Mechatronics learning projects.
| Weight | 10 g |
|---|
Related products
-
1 Channel 5V Relay Module
Original price was: ₹55.00.₹33.00Current price is: ₹33.00.Add to cartFeatures :
- 1 channel relay board
- Operating Voltage 5V
- Pull-down circuit for avoidance of malfunction
- Power supply indicator lamp
- Control indicator lamp
- Indicator for Relay output status
- Max Current : 20mA
- Relay Contact Current Capacity at AC250V: 10A
- Relay Contact Current Capacity at DC5V: 10A
- One normally closed contact and one normally open contact
- Triode drive, increasing relay coil
- High impedance controller pin
- Can Be controlled various appliances & other Equipment With Large current.
- Standard TTL Level logic controlled (AVR, Arduino, 8051, PIC, ARM)
- The module is compliant with international safety standards, control and load areas isolation trenches;
* Product Image is shown for illustrative purposes only and may differ from actual product.
-
2 Channel 5V Relay Module with Optocoupler
Original price was: ₹80.00.₹62.00Current price is: ₹62.00.Add to cartSpecification:
- High current relay, AC250V 10A, DC5V 10A
- 2 LEDs to indicate when relays are on
- Works with logic level signals from 3.3V or 5V devices
- Opto isolation circuitry
* Product Images are shown for illustrative purposes only and may differ from actual product.
-
W1209 Digital Temperature Controller Thermostat Module
Original price was: ₹120.00.₹80.00Current price is: ₹80.00.Add to cartW1209 Temperature Controller Module – Specifications
-
Type: Digital temperature controller / digital temp controller
-
Input Power: 12V DC
-
Measuring Input: NTC 10K 0.5% sensor
-
Waterproof Sensor: 0.5M probe
-
Output: 1-channel relay, 10A capacity
-
Temperature Range: -50°C to +110°C
-
Resolution: 0.1°C (-9.9 to 99.9°C), 1°C for other ranges
-
Measurement Accuracy: ±0.1°C
-
Control Accuracy: ±0.1°C
-
Refresh Rate: 0.5 seconds
-
-
Breadboard GL-12 840 Tie Points
Original price was: ₹229.00.₹49.00Current price is: ₹49.00.Add to cartFeatures
- 840 Tie Points – Plenty of room for ICs, components, and jumper wires.
- Dual Power Rails – Efficient power distribution for multiple components.
- Durable Build – ABS plastic housing with nickel-plated phosphor bronze contacts.
- Reusable & Solderless – Quickly change or adjust circuits without damaging parts.
- Expandable Design – Interlocking edges allow connection with additional breadboards.
- Self-Adhesive Backing – Securely mount on any flat surface or project base.
