DHT11 Temperature And Humidity Sensor Module with LED
Original price was: ₹125.00.₹55.00Current price is: ₹55.00.
Features:
- Input Supply voltage (VDC): 3.3 ~ 5
- Supply Current (mA): measurement 0.3mA standby 60μA.
- Temperature measurement range: 0~50 degrees
- Temperature measurement error: ±2 degrees
- Humidity measurement range: 20%~95%RH
- Humidity measurement error: ±5%RH
Only 2 left in stock
The DHT11 Temperature And Humidity Sensor Module with LED is a small humidity and temperature sensor that you can connect to your Arduino and get readings for temperature and humidity in the environment.
Features:
- DHT11 sensor with PCB and LED indicator along with cable; 3 to 5V power and I/O, 4 pins with 0.1″ spacing
- The board has pre-built 4.7K or 10K resistor, which you will need to use as a pull-up from the data pin to VCC.
- 2.5mA max current use during conversion (while requesting data)
- Good for 20-80% humidity readings with 5% accuracy
- Good for 0-50°C temperature readings ±2°C accuracy.
Applications:
- Weather monitoring stations
- IoT and smart home devices
- Greenhouse & agricultural monitoring
- HVAC control systems
- Data logging projects
- Educational electronics projects
Package Includes:
- 1 x DHT11 Temperature And Humidity Sensor Module.
- 3 x Female to Female Connecting cable.
| Weight | 10 g |
|---|
Related products
-
Soil Moisture Sensor Module
Original price was: ₹150.00.₹99.00Current price is: ₹99.00.Add to cartSpecifications of the Soil Moisture Sensor
- Operating voltage (Vcc): 3.3V to 5V
- Analog Output voltage: 0 to 4.2V@ Vcc = 5V
- Digital Output Voltage: 0V or 5V @ Vcc=5v
- Current consumption: 32mA
-
Digital LDR Module – Light Sensor
Original price was: ₹50.00.₹35.00Current price is: ₹35.00.Read moreFeatures:
✅ Simple to use, plug-and-play.
✅ Adjustable sensitivity using potentiometer.
✅ Low power consumption.
✅ Fast switching compared to analog readings.
✅ Useful in light detection, automatic street lights, daylight sensing, and DIY projects.Applications:
🔹 Automatic night lamp.
🔹 Smart curtains that close when light is high.
🔹 Light intensity alarms.
🔹 Robotics line-following sensors (combined with reflective surfaces).
🔹 Security systems to detect sudden darkness (hand covering sensor). -
DHT22 Digital Temperature and Humidity Sensor Module AM2302
Original price was: ₹250.00.₹108.00Current price is: ₹108.00.Add to cartFeatures:
- High accuracy temperature and humidity measurement
- Digital single-bus output for easy integration
- Wide humidity range: 0–100% RH
- Temperature range: -40°C to +80°C
- Long-term stability and low power consumption
- Compatible with Arduino, ESP32, Raspberry Pi, STM32, etc.
- Pre-calibrated and ready-to-use module
-
Infrared Obstacle Avoidance IR Sensor Module (Active Low)
Original price was: ₹80.00.₹22.00Current price is: ₹22.00.Add to cartFeatures:
- Easy to assemble and use
- Onboard detection indication
- The effective distance range of 2cm to 80cm
- A preset knob to fine-tune the distance range
- If there is an obstacle, the indicator lights on the circuit board.
- Infrared obstacle detection with active low output
- Adjustable detection distance via onboard potentiometer
- High sensitivity and fast response time
- Compact and easy-to-interface module
- Compatible with Arduino, Raspberry Pi, and other microcontrollers
- Low power consumption, stable performance
