BMP180 Digital Barometric Pressure Sensor Module
Original price was: ₹180.00.₹36.00Current price is: ₹36.00.
Features
- Measures barometric pressure, altitude & temperature
- High precision: ±1 hPa (pressure), ±0.5°C (temperature)
- Pressure range: 300–1100 hPa
- Operating voltage: 1.8V–3.6V (3.3V typical)
- I²C interface for easy integration
- Low power consumption (<1 μA in standby)
- Compact & lightweight (~2 g)
- Compatible with Arduino, Raspberry Pi & other microcontrollers
In stock
BMP180 Digital Barometric Pressure Sensor Module is used for measuring barometric pressure and altitude. It also has a temperature sensor for temperature compensation of pressure measurements. It uses push sensors for the BMP180. It offers a pressure measuring range of 300 to 1100 hPa with a relative pressure error of 0.12 hPa.
BMP 180 is a barometric pressure sensor with an I2C interface. Barometric pressure sensors measure the absolute pressure of the air around them. This pressure varies with both the weather and altitude. Depending on how you interpret the data, you can monitor changes in the weather, measure altitude, or any other tasks that require an accurate pressure reading.
Note: (1 hPa ≡ 100 Pa) which is equal to 0.001 bar (atmospheric)
Features :
- I2C interface.
- Max I2C Speed: 3.4Mhz
- Pressure conversion time: 5msec
- Fully calibrated.
- Small and easy to use.
- Voltage supply: 1.8 ~ 3.6 V
- Current supply: 5µA at 1Hz
- Peak current: 1000µA
- Very low noise: up to 0.02hPa (17cm)
- Pressure Range: 300hPa to 1100hPa (+9000m to -500m)
Package Includes :
- 1 x BMP180 Digital Barometric Pressure Sensor Module
- 1 x 4Burg Connector(Straight)
| Input Voltage | 1.8 ~ 3.6 V |
| Interface Type | I2C |
| Max I2C Speed | 3.4Mhz |
| PCB Size ( L x W ) | 1.3 x 1.2 cm |
| Peak Current | 1000µA |
| Pressure conversion time | 5 ms |
| Pressure Range | 300hPa to 1100hPa |
| Weight | 5 g |
|---|
Related products
-
1 Channel 5V Relay Module
Original price was: ₹55.00.₹33.00Current price is: ₹33.00.Add to cartFeatures :
- 1 channel relay board
- Operating Voltage 5V
- Pull-down circuit for avoidance of malfunction
- Power supply indicator lamp
- Control indicator lamp
- Indicator for Relay output status
- Max Current : 20mA
- Relay Contact Current Capacity at AC250V: 10A
- Relay Contact Current Capacity at DC5V: 10A
- One normally closed contact and one normally open contact
- Triode drive, increasing relay coil
- High impedance controller pin
- Can Be controlled various appliances & other Equipment With Large current.
- Standard TTL Level logic controlled (AVR, Arduino, 8051, PIC, ARM)
- The module is compliant with international safety standards, control and load areas isolation trenches;
* Product Image is shown for illustrative purposes only and may differ from actual product.
-
Arduino Portenta X8 – ABX00049
Original price was: ₹22,300.00.₹15,400.00Current price is: ₹15,400.00.Read moreFeatures
- Combines Linux and real-time cores for flexibility and performance
- NXP® i.MX 8M Mini Cortex®-A53 quad-core + M7 real-time processor
- 4GB LPDDR4 RAM, 16GB eMMC storage
- Wi-Fi and Bluetooth 5.0 connectivity
- USB-C programming and power port
- Industrial-grade reliability and security features
- Supports Edge AI and machine learning applications
-
4 Channel 5V Relay Module with Optocoupler
Original price was: ₹250.00.₹118.00Current price is: ₹118.00.Add to cartFeatures – 5V 4-Channel Relay Module with Optocoupler
-
4 Independent Channels – Control multiple devices simultaneously with precision.
-
Wide Operating Voltage – Supports 3.3V to 5V input, compatible with Arduino, ESP32, Raspberry Pi, and other microcontrollers.
-
High-Impedance Controller Pins – Ensures minimal current draw from the microcontroller and safe operation.
-
AC/DC Load Control – Easily switch 220V AC appliances or DC devices safely.
-
Dual Contacts – Each relay includes one normally open (NO) and one normally closed (NC) contact for flexible control.
-
Triode Drive for Relay Coil – Enhances switching efficiency and reduces malfunction risk.
-
Pull-Down Circuit – Prevents false triggering and ensures stable performance in noisy environments.
-
Indicator LEDs – Power and relay status indicators provide real-time visual feedback.
-
Clear Terminal Layout – Input signal, common terminal, and start conduction terminals are clearly marked for easy wiring.
-
Appliance Control Ready – Perfect for controlling lights, fans, motors, and other household or industrial appliances.
-
International Safety Compliance – Isolation trenches between control and load areas ensure safe operation and reduce risk of electrical faults.
-
Durable & Reliable – Designed for long-term use in smart automation, IoT, and industrial projects.
-
-
Arduino Portenta Breakout Board ASX00031
Original price was: ₹5,170.00.₹4,100.00Current price is: ₹4,100.00.Read moreKey Features
-
Full signal access: Connect to every high-density pin of Portenta boards for versatile testing.
-
Rapid prototyping: Speeds up development cycles for industrial-grade solutions.
-
Seamless integration: Works with Arduino Portenta H7 and other boards in the Arduino ecosystem.
-
Educational use: Ideal for training students and technicians in embedded systems and industrial-grade control.
-
Lab-friendly design: Compact, reliable, and ready for high-density connections.
-
Expandable with other Arduino boards: Integrates with Arduino Nano Original for compact projects.
-
